>The printer is a HP LaserJet 4000N which is connected via Ethernet >cable to a Linksys Router.
That may be the source of your problems. I do not believe the LinkSys Router will pass the Appletalk protocol. TCP/IP only. The PB 150 with its SCSI/Ethernet adaptor likely can't tunnel the Appletalk over TCP/IP as the later Macs can. Is it possible to move what is connected where, and connect the printer and the PB150 to a regular hub or switch to be sure the AppleTalk will be passed? If not, go buy a cheap 5 port switch (you should be able to get one on sale for $20 or less), and move everything plugged into the router to the switch, and then chain the switch to the router. -chris <http://www.mythtech.net> -- MacNetwork is sponsored by <http://lowendmac.com/> and... XRouter Pro | Share your DSL or cable modem between multiple computers! Dr. Bott | Only $199 <http://www.drbott.com/prod/MIH130.html> Support Low End Mac <http://lowendmac.com/lists/support.html> MacNetwork list info: <http://lowendmac.com/lists/macnet.html> --> AOL users, remove "mailto:"; end list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/macnetwork%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
