Hi, No, it wouldn't work like that, but you can of course save the MIDI on your USB stick and play it on your keyboard. That way it would sound the same, generally. If you want to put it on a CD or mp3 player though, thats when you need to somehow get the audio of the keyboard playing back the MIDI file into a wav or mp3 file. You can do that by sending your keyboard's output to a computer's input and have an audio program record it. However, you may only get mono sound that way. As long as you use your keyboard's headphone output you should at least get the full signal from your keyboard, and from there its hoping that your pc's mic jack can take a stereo signal. If it only takes mono, you will need some sort of audio interface or maybe a small USB sound card that can take a stereo signal.
Florian 2015-07-03 17:57 GMT+02:00, mike hall <[email protected]>: > Oh wow Florian Thank you for checking for me and, your help. i have 1 more > question for you though. if if my keyboard can play the midi file on a > stick, then can i be able to save it on that stick and then convert the midi > > with another program and if i did that would it still be the same sound i > put on the stick. Thanks for all of your help again and god bless you my > friend. > ----- Original Message ----- > From: "Florian Beijers" <[email protected]> > To: "QWS list" <[email protected]> > Sent: Friday, July 03, 2015 11:16 AM > Subject: Re: QWS List some questions > > >> Hello Mike, >> >> I did some checking for you. I think the ES version of that model does >> have a USB slot for playing back MIDI files on a usb stick, but for as >> far as I can tell it does not offer the ability to convert to Wav or >> Mp3 on the unit itself. I believe the XS version of the same >> instrument might, but sadly not this one. >> >> Florian >> >> 2015-07-03 17:12 GMT+02:00, Joe Giovanelli <[email protected]>: >>> Hi All, >>> >>> MYSTERY SOLVED! >>> >>> Nicole had it right, but so did I, well, in part. >>> >>> I knew that my Casio supported the GM standard as does the Samick. Also >>> knew >>> that the programs I used were those in GM. >>> >>> I used the instrument list for my synth to select the sounds. There's a >>> small penalty here, and it got me into trouble. The Casio has a number >>> of >>> banks and certain instruments employ the same program number in >>> different >>> banks. >>> >>> I went through the track properties for each track and reset a couple of >>> bans back to 0. >>> >>> Now I can play this sequence and, hopefully, others that I may create on >>> both my Casio and the Samick. >>> >>> The mix heard using my Casio and that of the Samick are not quite the >>> same, >>> but there's no cure for that. >>> >>> I thank all of you for your patience while struggled to solve this one. >>> The >>> solution hit me as I wrote a message to Mr. Bowden about my dilemma. >>> >>> Should I need to write you again, it won't relate to mapping. >>> >>> Joe Giovanelli >>> ----- Original Message ----- >>> From: Nicole Massey <[email protected]> >>> To: "QWS list" <[email protected]> >>> Date: Thursday, July 2, 2015 16:42 >>> Subject: RE: QWS List some questions >>> >>>> >>>> >>>> Okay, here's the problem - it can't be. Either it's the same on both or >>>> it's not, and getting the same result means either you're using a >>>> different >>>> bank or there's some other switch in the Samick that makes it go into >>>> GM >>>> mode for certain things. >>>> Are you using the exact same sounds in the other sequences that work on >>>> both >>>> as you're using in the one you create in QWS? A standard MIDI file is a >>>> standard MIDI file no matter what you play it on, so there has to be >>>> some >>>> difference going on here. A=A and B=But all the time, no matter if it's >>>> MIDI >>>> or something else, and MIDI is a very straightforward data protocol >>>> that >>>> doesn't vary that much. >>>> >>>> > -----Original Message----- >>>> > From: [email protected] [mailto:[email protected]] On Behalf >>>> > Of >>>> > Joe Giovanelli >>>> > Sent: Thursday, July 02, 2015 3:35 PM >>>> > To: QWS list >>>> > Subject: Re: QWS List some questions >>>> > >>>> > Well, I do understand what you said here. Keep in mind, however, that >>>> > >>>> > I >>>> > have lots of sequences which play on my Casio with QWS and also play >>>> > on >>>> > the Samick which uses its own player. Thus, the mapping is the same >>>> > on >>>> > both devices. >>>> > >>>> > Joe Giovanelli >>>> > >>>> > ----- Original Message ----- >>>> > From: Nicole Massey <[email protected]> >>>> > To: "QWS list" <[email protected]> >>>> > Date: Thursday, July 2, 2015 14:38 >>>> > Subject: RE: QWS List some questions >>>> > >>>> > > >>>> > > >>>> > > You don't put patch numbers in through the controller editor, you >>>> > > change them in the properties of the track unless you're changing >>>> > > the >>>> > > program later in the track. >>>> > > It's pretty simple - if the sounds aren't right then something >>>> > > isn't >>>> > > set up right, and either the Casio or the Samick is accessing a non >>>> > GM >>>> > > compatible bank of sounds. Get the sound lists for both instruments >>>> > > and compare them and you'll know just what is going on. >>>> > > >>>> > > >>>> > > > -----Original Message----- >>>> > > > From: [email protected] [mailto:[email protected]] On >>>> > Behalf >>>> > > > Of Joe Giovanelli >>>> > > > Sent: Thursday, July 02, 2015 12:18 PM >>>> > > > To: QWS list >>>> > > > Subject: Re: QWS List some questions >>>> > > > >>>> > > > Hello, Nicole, >>>> > > > >>>> > > > Yes, the Samick is compatible. >>>> > > > >>>> > > > Take note of the idea that the Samick successfully plays MIDI >>>> > > > files >>>> > > > properly and that these files can also be played by Qws. >>>> > > > >>>> > > > You said something which is potentially valuable. You spoke about >>>> > > > changing patch numbers. >>>> > > > >>>> > > > I'd like to look at those but don't know how to check them in the >>>> > > > Control Editor. I have never understood that Editor. >>>> > > > >>>> > > > Joe Giovanelli >>>> > > > >>>> > > > ----- Original Message ----- >>>> > > > From: Nicole Massey <[email protected]> >>>> > > > To: "QWS list" <[email protected]> >>>> > > > Date: Thursday, July 2, 2015 12:24 >>>> > > > Subject: RE: QWS List some questions >>>> > > > >>>> > > > > >>>> > > > > >>>> > > > > Is the Samick GM, GM2, GS, or XG compatible? If not then it has >>>> > > > > other patches in those patch locations and you're going to want >>>> > to >>>> > > > > change patch numbers. >>>> > > > > Any sound source can assign any sound to any program change >>>> > number >>>> > > > > if they're not using one of the above listed patch structures. >>>> > > > > This >>>> > > > isn't >>>> > > > > a flaw at all. >>>> > > > > You will need to get the patch list for the Samick to know just >>>> > > > > what >>>> > > > to do. >>>> > > > > >>>> > > > > > -----Original Message----- >>>> > > > > > From: [email protected] [mailto:[email protected]] On >>>> > > > Behalf >>>> > > > > > Of Joe Giovanelli >>>> > > > > > Sent: Thursday, July 02, 2015 10:11 AM >>>> > > > > > To: QWS list >>>> > > > > > Subject: Re: QWS List some questions >>>> > > > > > >>>> > > > > > Hi, Florian and List, >>>> > > > > > >>>> > > > > > The instruments I expected to hear are: acoustic guitar, >>>> > > > > > acoustic bass, celeste, glockenspiel, strings, and female >>>> > voices. >>>> > > > > > >>>> > > > > > About all I recognized was the celeste. I don't know what the >>>> > > > > > other instruments were. I stopped the playback almost as soon >>>> > as >>>> > > > > > I knew >>>> > > > it >>>> > > > > > would not be what I wanted. >>>> > > > > > >>>> > > > > > Joe Giovanelli >>>> > > > > > >>>> > > > > > ----- Original Message ----- >>>> > > > > > From: Florian Beijers <[email protected]> >>>> > > > > > To: "QWS list" <[email protected]> >>>> > > > > > Date: Thursday, July 2, 2015 9:49 >>>> > > > > > Subject: Re: QWS List some questions >>>> > > > > > >>>> > > > > > > >>>> > > > > > > >>>> > > > > > > Hi Joe, >>>> > > > > > > >>>> > > > > > > Ok, so your music doesn't come out right on your electric >>>> > piano. >>>> > > > > > Could >>>> > > > > > > you tell me what exactly happens? What instruments do you >>>> > > > > > > expect, and which ones do you get? >>>> > > > > > > >>>> > > > > > > >>>> > > > > > > Thanks, >>>> > > > > > > Florian >>>> > > > > > > >>>> > > > > > > 2015-07-02 15:10 GMT+02:00, Nicole Massey >>>> > <[email protected]>: >>>> > > > > > > > Okay, then how do your sequences not play correctly? What >>>> > > > > > > > problems are you encountering? >>>> > > > > > > > >>>> > > > > > > >> -----Original Message----- >>>> > > > > > > >> From: [email protected] >>>> > > > > > > >> [mailto:[email protected]] >>>> > > > > > > >> On Behalf Of Joe Giovanelli >>>> > > > > > > >> Sent: Thursday, July 02, 2015 8:04 AM >>>> > > > > > > >> To: QWS list >>>> > > > > > > >> Subject: Re: QWS List some questions >>>> > > > > > > >> >>>> > > > > > > >> Hello, >>>> > > > > > > >> >>>> > > > > > > >> First, thank you for all of you who took time to offer >>>> > > > > > suggestions. >>>> > > > > > > >> >>>> > > > > > > >> It looks like I didn't state my problem clearly enough. >>>> > I'm >>>> > > > > > > >> using Windows 7 Professional. I use a Casio PX-300 to >>>> > > > > > > >> record and play my music. Of course, I use QWS. Playback >>>> > is >>>> > > > > > > >> as >>>> > > > expected. >>>> > > > > > > >> >>>> > > > > > > >> When I take my sequence to a Samick electric "piano," >>>> > > > > > > >> that >>>> > > > > > > >> my >>>> > > > > > music >>>> > > > > > > >> does not play correctly. >>>> > > > > > > >> >>>> > > > > > > >> I have a number of MIDI sequences and these play >>>> > > > > > > >> properly >>>> > > > > > > >> on that Samick. To me this rules out difficulties with >>>> > > > > > > >> sound >>>> > > > mapping. >>>> > > > > > These >>>> > > > > > > >> same sequences work well with QWS. Again, this would >>>> > > > > > > >> indicate that there's no mapping incompatibility. >>>> > > > > > > >> >>>> > > > > > > >> One list member suggested that I use a MIDI program >>>> > > > > > > >> designed >>>> > > > to >>>> > > > > > > >> solve some Microsoft issues. It isn't apparent to me how >>>> > > > > > > >> that can help in this situation. I guess I'm missing >>>> > something. >>>> > > > > > > >> >>>> > > > > > > >> Joe Giovanelli >>>> > > > > > > >> >>>> > > > > > > >> ----- Original Message ----- >>>> > > > > > > >> From: Florian Beijers <[email protected]> >>>> > > > > > > >> To: "QWS list" <[email protected]> >>>> > > > > > > >> Date: Thursday, July 2, 2015 4:09 >>>> > > > > > > >> Subject: Re: QWS List some questions >>>> > > > > > > >> >>>> > > > > > > >> > >>>> > > > > > > >> > >>>> > > > > > > >> > Hi, >>>> > > > > > > >> > >>>> > > > > > > >> > Some questions, to clear up some of the mess Mike. >>>> > > > > > > >> > When you say your sequence plays well in QWS, what >>>> > > > > > > >> > exactly does that mean? Does your song play over your >>>> > > > > > > >> > computer speakers, or over the speakers of your >>>> > instrument? >>>> > > > > > > >> > If it plays over your speakers, the problem is likely >>>> > > > > > > >> > that your instrument uses different bank and patch >>>> > > > > > > >> > numbers than what your pc is using, which gives the >>>> > > > > > > >> > difference in >>>> > > > instruments. >>>> > > > > > > >> > If it does play over your instrument, I'd like to ask >>>> > you >>>> > > > how >>>> > > > > > you >>>> > > > > > > >> > subsequently play the MIDI file back on your >>>> > > > > > > >> > instrument >>>> > > > itself. >>>> > > > > > > >> > Is there a process you use for that? >>>> > > > > > > >> > >>>> > > > > > > >> > Regards, >>>> > > > > > > >> > Florian >>>> > > > > > > >> > >>>> > > > > > > >> > 2015-07-02 10:01 GMT+02:00, Juan Bello >>>> > > > <[email protected]>: >>>> > > > > > > >> > > hi, on Windows xp you could just simply go inside >>>> > > > > > > >> > > the >>>> > > > sound >>>> > > > > > > >> settings >>>> > > > > > > >> > > in control panel and choose your default midi >>>> > > > > > > >> > > device. >>>> > > > > > > >> > > But Microsoft being silly and lame for all musicians >>>> > as >>>> > > > > > > >> > > they >>>> > > > > > always >>>> > > > > > > >> > > have been, >>>> > > > > > > >> and >>>> > > > > > > >> > > will ever be, hid the option of selecting default >>>> > > > > > > >> > > midi >>>> > > > > > > >> > > device on Windows 7 and beyond, forever. >>>> > > > > > > >> > > FOCCCCCbi'bi'bi'bi'bi'rtunately a few ones have come >>>> > > > > > > >> > > to >>>> > the >>>> > > > rescue, >>>> > > > > > > >> > > and created this small utility that is 100% >>>> > > > > > > >> > > accesible, >>>> > > > > > > >> > > because it is a really trivially >>>> > > > > > simple >>>> > > > > > > >> > > task that deserves a section on a subsection of the >>>> > > > control >>>> > > > > > > >> > > panel. You just download and run the executable file >>>> > > > inside >>>> > > > > > > >> > > this zip file, its very small in size, no >>>> > > > > > > >> > > installation >>>> > > > > > > >> > > is even necessary. If you have problems, install the >>>> > > > > > > >> > > dot net framework from the Windows updates or google >>>> > > > > > > >> > > for it. And also try >>>> > > > > > running >>>> > > > > > > >> > > the program again as administrator by selecting the >>>> > > > > > > >> > > executable file, pressing the applications key or >>>> > shift >>>> > > > > > > >> > > plus f10 and then finding the option run >>>> > > > > > > >> as administrator. >>>> > > > > > > >> > > >>>> > > > > > > >> > > http://sdim.gr/mpc/MidiPortConfig.zip >>>> > > > > > > >> > > >>>> > > > > > > >> > > 2015-07-01 22:25 GMT-05:00, mike hall >>>> > > > > > <[email protected]>: >>>> > > > > > > >> > >> Hello Nicole. Sorry I didn't punctuate the right >>>> > > > > > > >> > >> way, >>>> > > > > > > >> > >> because i >>>> > > > > > > >> was >>>> > > > > > > >> > >> trying out a text to speech program to see how it >>>> > > > > > > >> > >> would >>>> > > > work. >>>> > > > > > > >> > >> and, i guess it didn't work out like i liked it to. >>>> > So >>>> > > > > > > >> > >> i am sorry about that post and i am glad you told >>>> > > > > > > >> > >> me >>>> > > > > > > >> > >> about >>>> > > > it. >>>> > > > > > > >> > >> thank you. I'm using Windows 7. So are you saying, >>>> > > > > > > >> > >> that i >>>> > > > > > need >>>> > > > > > > >> > >> sighted help setting my audio default device up? >>>> > > > > > > >> > >> Well >>>> > > > > > > >> > >> thank you for your help and, i hope you can read >>>> > > > > > > >> > >> this >>>> > > > > > > >> > >> email better to your satisfaction. Take care and >>>> > > > > > > >> > >> god >>>> > > > bless. >>>> > > > > > > >> > >> ----- Original Message ----- >>>> > > > > > > >> > >> From: "Nicole Massey" <[email protected]> >>>> > > > > > > >> > >> To: "QWS list" <[email protected]> >>>> > > > > > > >> > >> Sent: Wednesday, July 01, 2015 10:38 PM >>>> > > > > > > >> > >> Subject: RE: QWS List some questions >>>> > > > > > > >> > >> >>>> > > > > > > >> > >> >>>> > > > > > > >> > >>> QWS handles this for you if you set up the track >>>> > > > > > > >> > >>> properties as >>>> > > > > > > >> you >>>> > > > > > > >> > >>> want them. Make sure that on playback you have >>>> > > > > > > >> > >>> your >>>> > > > > > > >> > >>> port set >>>> > > > > > > >> correctly. >>>> > > > > > > >> > >>> When playing a standard MIDI file in anything >>>> > > > > > > >> > >>> other >>>> > > > > > > >> > >>> than QWS it's going to play to your default MIDI >>>> > > > > > > >> > >>> playback >>>> > > > device. >>>> > > > > > > >> > >>> Note also that playback devices aren't required to >>>> > > > > > > >> > >>> use the same sound maps unless they're GM, GM2, >>>> > > > > > > >> > >>> GS, >>>> > > > > > > >> > >>> or XG >>>> > > > compliant. >>>> > > > > > > >> > >>> Only >>>> > > > > > > >> these >>>> > > > > > > >> > >>> sound mapping schemes have consistency across MIDI >>>> > > > > > > >> > >>> devices, and anything that isn't one >>>> > > > > > > >> > >>> >>>> > > > > > > >> > >>> of >>>> > > > > > > >> > >>> these can put any sound in any program number. >>>> > > > > > > >> > >>> This >>>> > > > > > > >> > >>> may be part >>>> > > > > > > >> of >>>> > > > > > > >> > >>> your problem depending on what you're using for >>>> > > > playback. >>>> > > > > > > >> > >>> >>>> > > > > > > >> > >>>> -----Original Message----- >>>> > > > > > > >> > >>>> From: [email protected] >>>> > > > > > > >> > >>>> [mailto:[email protected]] On Behalf Of Joe >>>> > > > > > > >> > >>>> Giovanelli >>>> > > > > > > >> > >>>> Sent: Wednesday, July 01, 2015 8:27 PM >>>> > > > > > > >> > >>>> To: QWS list >>>> > > > > > > >> > >>>> Subject: Re: QWS List some questions >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> Hello, Nicole, >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> When I set up each track, I filled in all the >>>> > > > > > > >> > >>>> appropriate >>>> > > > > > items. >>>> > > > > > > >> > >>>> That includes bank, the instrument (taken from an >>>> > > > > > instrument >>>> > > > > > > >> > >>>> list). I set pan and volume as needed in order to >>>> > > > > > > >> > >>>> get the sound >>>> > > > > > > >> balance I wanted. >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> It all works well when playing my sequence via >>>> > > > > > > >> > >>>> QWS. >>>> > > > > > > >> > >>>> It does not produce anything like the correct >>>> > > > > > > >> > >>>> instruments when I transfer this sequence to a >>>> > synth >>>> > > > > > > >> > >>>> equipped with >>>> > > > a >>>> > > > > > > >> > >>>> MIDI >>>> > > > > > player. >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> I can't remember but much about this, but years >>>> > > > > > > >> > >>>> ago >>>> > > > when >>>> > > > > > > >> > >>>> I had a different sequencer, I had to enter all >>>> > > > > > > >> > >>>> those valuep at the >>>> > > > > > > >> start >>>> > > > > > > >> > >>>> of each track. >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> I can figure what to enter, but do not know how >>>> > > > > > > >> > >>>> to >>>> > > > > > > >> > >>>> do that in >>>> > > > > > > >> QWS. >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> I hope my explanation makes more sense now. >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> Thank you, Nicole and others, for your ideas. >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> Joe Giovanelli >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> ----- Original Message ----- >>>> > > > > > > >> > >>>> From: Nicole Massey <[email protected]> >>>> > > > > > > >> > >>>> To: "QWS list" <[email protected]> >>>> > > > > > > >> > >>>> Date: Wednesday, July 1, 2015 20:51 >>>> > > > > > > >> > >>>> Subject: RE: QWS List some questions >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> > >>>> > > > > > > >> > >>>> > >>>> > > > > > > >> > >>>> > This isn't just a QWS situation - it's the way >>>> > > > > > > >> > >>>> > MIDI works dependent upon the hardware or >>>> > software >>>> > > > > > > >> > >>>> > it's >>>> > > > controlling. >>>> > > > > > > >> > >>>> > QWS does use the -1 value to indicate that it >>>> > > > > > > >> > >>>> > isn't going to send anything, leaving >>>> > > > > > > >> > >>>> things >>>> > > > > > > >> > >>>> > the way they were last set. Some devices will >>>> > > > > > > >> > >>>> > reset >>>> > > > to >>>> > > > > > > >> > >>>> > a set value, but most will leave things as they >>>> > > > > > > >> > >>>> > were until something new comes in unless you >>>> > > > > > > >> > >>>> > sent >>>> > > > > > > >> > >>>> > an All Controllers Off message >>>> > > > > > > >> (if >>>> > > > > > > >> > >>>> > supported by the device - this is a recent >>>> > > > > > > >> > >>>> > addition >>>> > > > to >>>> > > > > > the >>>> > > > > > > >> > >>>> > controller list) or other reset commands in >>>> > Sysex. >>>> > > > > > > >> > >>>> > So >>>> > > > > > this >>>> > > > > > > >> kind >>>> > > > > > > >> > >>>> > of behavior is normal for MIDI, which is why I >>>> > > > > > > >> > >>>> > always set the volume, pan, reverb, and chorus >>>> > > > > > > >> > >>>> > values >>>> > > > > > > >> > >>>> in the track properties. >>>> > > > > > > >> > >>>> > >>>> > > > > > > >> > >>>> > > -----Original Message----- >>>> > > > > > > >> > >>>> > > From: [email protected] >>>> > > > > > > >> > >>>> > > [mailto:[email protected]] >>>> > > > > > > >> On >>>> > > > > > > >> > >>>> Behalf >>>> > > > > > > >> > >>>> > > Of John Sanfilippo >>>> > > > > > > >> > >>>> > > Sent: Wednesday, July 01, 2015 5:52 PM >>>> > > > > > > >> > >>>> > > To: QWS list >>>> > > > > > > >> > >>>> > > Subject: Re: QWS List some questionns >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > I'm not quite certain of what you are asking, >>>> > > > > > > >> > >>>> > > but one thing you might try is setting the >>>> > > > > > > >> > >>>> > > volume of every >>>> > > > > > track >>>> > > > > > > >> > >>>> > > to 100 or 127. I found that when I set track >>>> > > > > > > >> > >>>> > > volumes, the next time I opened an otherwise >>>> > > > > > > >> > >>>> > > empty qws midi >>>> > > > > > file, >>>> > > > > > > >> > >>>> > > it remembered the other track and >>>> > > > > > > >> > >>>> instrument settings. >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > Just a wild guess. It can't hurt to try. >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > js >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > ----- Original Message ----- >>>> > > > > > > >> > >>>> > > From: "Joe Giovanelli" >>>> > > > > > > >> > >>>> > > <[email protected]> >>>> > > > > > > >> > >>>> > > To: "QWS list" <[email protected]> >>>> > > > > > > >> > >>>> > > Sent: Wednesday, July 1, 2015 16:02 >>>> > > > > > > >> > >>>> > > Subject: QWS List some questionns >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > > Hello List Members, >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > I have a couple of questions. >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > I have created a sequence and edited it to >>>> > > > > > > >> > >>>> > > > my >>>> > > > > > > >> satisfaction. >>>> > > > > > > >> > >>>> > > > Although >>>> > > > > > > >> > >>>> > > it >>>> > > > > > > >> > >>>> > > > plays properly through QWS, it does not >>>> > > > > > > >> > >>>> > > > play >>>> > > > > > correctly >>>> > > > > > > >> when >>>> > > > > > > >> > >>>> > > > the >>>> > > > > > > >> > >>>> > > sequence >>>> > > > > > > >> > >>>> > > > is transferred to another instrument which >>>> > > > > > > >> > >>>> > > > does not >>>> > > > > > > >> involve QWS. >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > The initial setting for each track were >>>> > > > > > > >> > >>>> > > > done >>>> > > > using >>>> > > > > > the >>>> > > > > > > >> > >>>> > > > track >>>> > > > > > > >> > >>>> > > properties. >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > It appears that QWS "knows" what I intended >>>> > > > > > > >> > >>>> > > > but this info is not transmitted to other >>>> > equipment. >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > How do I get the right settings written >>>> > > > > > > >> > >>>> > > > directly to >>>> > > > > > my >>>> > > > > > > >> sequence? >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > I probably have other questions but perhaps >>>> > > > > > > >> > >>>> > > > this is enough for this >>>> > > > > > > >> > >>>> > > round. >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > Thank you for reading this. >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > Joe Giovanelli To unsubscribe or change >>>> > > > > > > >> > >>>> > > > list >>>> > > > > > > >> > >>>> > > > options, see >>>> > > > > > > >> > >>>> > > http://lists.andrelouis.com >>>> > > > > > > >> > >>>> > > > >>>> > > > > > > >> > >>>> > > > for archived list posts, see >>>> > > > > > > >> > >>>> > > > http://www.mail- >>>> > archive.com/[email protected] >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > To unsubscribe or change list options, see >>>> > > > > > > >> > >>>> > > http://lists.andrelouis.com >>>> > > > > > > >> > >>>> > > >>>> > > > > > > >> > >>>> > > for archived list posts, see http://www.mail- >>>> > > > > > > >> > >>>> > > archive.com/[email protected] >>>> > > > > > > >> > >>>> > >>>> > > > > > > >> > >>>> > To unsubscribe or change list options, see >>>> > > > > > > >> > >>>> http://lists.andrelouis.com >>>> > > > > > > >> > >>>> > >>>> > > > > > > >> > >>>> > for archived list posts, see >>>> > > > > > > >> > >>>> > http://www.mail-archive.com/[email protected] >>>> > > > > > > >> > >>>> To unsubscribe or change list options, see >>>> > > > > > > >> > >>>> http://lists.andrelouis.com >>>> > > > > > > >> > >>>> >>>> > > > > > > >> > >>>> for archived list posts, see http://www.mail- >>>> > > > > > > >> > >>>> archive.com/[email protected] >>>> > > > > > > >> > >>> >>>> > > > > > > >> > >>> To unsubscribe or change list options, see >>>> > > > > > > >> > >>> http://lists.andrelouis.com >>>> > > > > > > >> > >>> >>>> > > > > > > >> > >>> for archived list posts, see >>>> > > > > > > >> > >>> http://www.mail-archive.com/[email protected] >>>> > > > > > > >> > >>> >>>> > > > > > > >> > >> >>>> > > > > > > >> > >> To unsubscribe or change list options, see >>>> > > > > > > >> > >> http://lists.andrelouis.com >>>> > > > > > > >> > >> >>>> > > > > > > >> > >> for archived list posts, see >>>> > > > > > > >> > >> http://www.mail-archive.com/[email protected] >>>> > > > > > > >> > >> >>>> > > > > > > >> > > >>>> > > > > > > >> > > >>>> > > > > > > >> > > - >>>> > > > > > > >> > > Juan Pablo Bello >>>> > > > > > > >> > > Cel. 313-879-2884 >>>> > > > > > > >> > > To unsubscribe or change list options, see >>>> > > > > > > >> > > http://lists.andrelouis.com >>>> > > > > > > >> > > >>>> > > > > > > >> > > for archived list posts, see >>>> > > > > > > >> > > http://www.mail-archive.com/[email protected] >>>> > > > > > > >> > > >>>> > > > > > > >> > To unsubscribe or change list options, see >>>> > > > > > > >> http://lists.andrelouis.com >>>> > > > > > > >> > >>>> > > > > > > >> > for archived list posts, see >>>> > > > > > > >> > http://www.mail-archive.com/[email protected] >>>> > > > > > > >> To unsubscribe or change list options, see >>>> > > > > > > >> http://lists.andrelouis.com >>>> > > > > > > >> >>>> > > > > > > >> for archived list posts, see http://www.mail- >>>> > > > > > > >> archive.com/[email protected] >>>> > > > > > > > >>>> > > > > > > > To unsubscribe or change list options, see >>>> > > > > > > > http://lists.andrelouis.com >>>> > > > > > > > >>>> > > > > > > > for archived list posts, see >>>> > > > > > > > http://www.mail-archive.com/[email protected] >>>> > > > > > > > >>>> > > > > > > To unsubscribe or change list options, see >>>> > > > > > http://lists.andrelouis.com >>>> > > > > > > >>>> > > > > > > for archived list posts, see >>>> > > > > > > http://www.mail-archive.com/[email protected] >>>> > > > > > To unsubscribe or change list options, see >>>> > > > > > http://lists.andrelouis.com >>>> > > > > > >>>> > > > > > for archived list posts, see http://www.mail- >>>> > > > > > archive.com/[email protected] >>>> > > > > >>>> > > > > To unsubscribe or change list options, see >>>> > > > http://lists.andrelouis.com >>>> > > > > >>>> > > > > for archived list posts, see >>>> > > > > http://www.mail-archive.com/[email protected] >>>> > > > To unsubscribe or change list options, see >>>> > > > http://lists.andrelouis.com >>>> > > > >>>> > > > for archived list posts, see http://www.mail- >>>> > > > archive.com/[email protected] >>>> > > >>>> > > To unsubscribe or change list options, see >>>> > http://lists.andrelouis.com >>>> > > >>>> > > for archived list posts, see >>>> > > http://www.mail-archive.com/[email protected] >>>> > To unsubscribe or change list options, see >>>> > http://lists.andrelouis.com >>>> > >>>> > for archived list posts, see http://www.mail- >>>> > archive.com/[email protected] >>>> >>>> To unsubscribe or change list options, see http://lists.andrelouis.com >>>> >>>> for archived list posts, see >>>> http://www.mail-archive.com/[email protected] >>> To unsubscribe or change list options, see http://lists.andrelouis.com >>> >>> for archived list posts, see >>> http://www.mail-archive.com/[email protected] >>> >> To unsubscribe or change list options, see http://lists.andrelouis.com >> >> for archived list posts, see >> http://www.mail-archive.com/[email protected] >> > > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected] > To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
