MATPOWER models loads as constant real and reactive power injections. So, you'll have to implement all the load models. But, I don't think it would be overtly difficult if you explore how MATPOWER works a little bit.
Shri From: arun s nair <arunsnair...@gmail.com<mailto:arunsnair...@gmail.com>> Reply-To: MATPOWER discussion forum <matpowe...@list.cornell.edu<mailto:matpowe...@list.cornell.edu>> Date: Tue, 10 Feb 2015 10:16:21 -0600 To: MATPOWER discussion forum <matpowe...@list.cornell.edu<mailto:matpowe...@list.cornell.edu>> Subject: Re: Effect of loads in IEEE 39 bus system Hi Shri, I want to analyse the effect of these load models on the power-voltage curves of buses. It's effect on the critical voltage and power, is it possible to do it using Matpower? If you have any suggestions please let me know, it will be of great help. Regards Nair On Tue, Feb 10, 2015 at 12:19 AM, Abhyankar, Shrirang G. <abhy...@mcs.anl.gov<mailto:abhy...@mcs.anl.gov>> wrote: What sort of analysis do you want to run? Such load models are typically used in system dynamics studies, not for steady-state analysis. If you want to do dynamics assessment, then MATPOWER is not the tool for you as it is a steady-state analysis tool. Shri From: arun s nair <arunsnair...@gmail.com<mailto:arunsnair...@gmail.com>> Reply-To: MATPOWER discussion forum <matpowe...@list.cornell.edu<mailto:matpowe...@list.cornell.edu>> Date: Mon, 9 Feb 2015 22:10:19 -0700 To: MATPOWER discussion forum <matpowe...@list.cornell.edu<mailto:matpowe...@list.cornell.edu>> Subject: Effect of loads in IEEE 39 bus system Hi All I need to analyse the effect of different kinds of load models (like ZIP load model, composite load model, exponential load model etc ) in IEEE 39 bus system, its for my graduate research. Is it possible to do it Matpower, or is there any other way to do it? Your help will be greatly appreciated. Thanks & Regards Nair
