Matt,
Bleed the lines properly, start with left rear, right rear, left front then
right front.
Cheers
Feral Errol
mailto:[EMAIL PROTECTED]
http://www.datrats.com.au/
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, January 01, 2001 2:33 PM
To: [EMAIL PROTECTED]
Subject: Re: rear disks!-HELP
terry, errol,
yes it does feel spongy, iv'e bled the system 3times and it's still the
same.
the m/c is a 3/4 sanyco?? must be a cheap shit brand. i'm running vl
commodore callipers single floaters. when you pump the peddal it comes good
then if you let it go for a little and hit the peddal again and it goes
straight to the floor. someone i spoke to said to clamp off the back from
the front and vice verser . when i clamped off the rear calipers i got a
good peddal feel and it didnt feel spongy at all , but when iclamped off the
front callipers it felt spongy again.
could it be the booster??
matt
-----Original Message-----
From: Errol Smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Sunday, 31 December 2000 4:41
Subject: RE: rear disks!-HELP
>Matt,
>I assume you mean spongy with that master cylinder size. The pedal travel
>would also be large.
>I would fit up a 7/8" MC from a 260C or 280C and you should have a lot
>better pedal feeel and less pedal travel.
>Cheers Feral Errol
>[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
>http::/www.datrats.com.au <http://www.datrats.com.au>
>
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]On Behalf Of
>[EMAIL PROTECTED]
>Sent: Sunday, December 31, 2000 1449
>To: [EMAIL PROTECTED]
>Subject: Re: rear disks!-HELP
>
>
>errol,
>i'm running r31 rears , 10'' vented fronts, 180b 3/4'' m/c and a 180b bais
>valve, and the brakes feel a bit funny . is the m/c size ok to use with
that
>combo?
>thanks
>matt
>-----Original Message-----
>From: Errol Smith <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>Date: Wednesday, 27 December 2000 7:41
>Subject: RE: rear disks!-HELP
>
>
>>Nat,
>>I have some diagrams on how to fit a mini pressure regulator to limit rear
>>brake pressure. Mail me direct
>>Cheers
>>Feral Errol
>>mailto:[EMAIL PROTECTED]
>>http://www.datrats.com.au/
>>
>>-----Original Message-----
>>From: [EMAIL PROTECTED]
>>[mailto:[EMAIL PROTECTED]]On Behalf Of nat P.
>>Sent: Wednesday, December 27, 2000 0042
>>To: Ozdat Osdat
>>Subject: rear disks!-HELP
>>
>>
>>
>>Morning Losters, Hope everyone had a good christmas!
>>I am fitting R31 disk to my Datto, and I was told that
>>there is too much pressure for them. I am running 240K
>>fronts with a 7/9 Master, is there a cheap way to fix
>>this prob?
>>Cheers NAT
>>
>>__________________________________________________
>>Do You Yahoo!?
>>Yahoo! Shopping - Thousands of Stores. Millions of Products.
>>http://shopping.yahoo.com/
>>
>>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
