Jordan,
I guess you strip what you need and advertise the rest. Keep the electrical
stuff as it all fits into a 1600, they have electronic flasher units, you
can wire in the hazards and the rear door courtesy lights, under bonnet
light, hydraulics and heaps of other stuff. Some of them have a nice centre
console that can look good in a 1600.
BTW, a 78 Skyline is a C210.
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jordan
Sent: Saturday, 23 June 2001 12:19
To: [EMAIL PROTECTED]
Subject: Re: 1978 Skiline (R31?) Disk Brake min width +struts
Terry,
Thanks for that info. Bought a whole skiline today, its got a really friggin
noisy uni in it somewhere, and its rusty a f*&k, and also left a nice smoke
screen up past the burke rd cafes (whoops) but other thatn that, 1 good
diff, 5 good tyers, 1 good 5 speed, and 2 good struts/brake disks. and a
clean interior. I dont have a bloody clue what im going to do with the rest
of the car yet. Anyone got any surgestions?
Thanks
Jordan
> Jordan,
>
> Minimum thickness of the 270mm C210 rotor is 10.5mm
>
> The struts will bolt into the 70+ 1600 reversed left to right and using
1600
> springs and hats but some of the callipers will not fit without some
> grinding but you can use the 240K twin spot callipers (preferred as you
can
> get better pads) or 200B Girlock callipers if this happens.
>
> Have you bought these yet, if not and you live in Sydney, there is a set
of
> complete 240K struts with twin spots at Dunkers that I saw the other day
> that may be worth a look.
>
> The R180 diff was still in it too.
>
> regards
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Jordan
> Sent: Thursday, 21 June 2001 8:58
> To: [EMAIL PROTECTED]
> Subject: 1978 Skiline (R31?) Disk Brake min width +struts
>
>
> Hello list
> Just seeing if anyone knows what the minimum disk width, for RTA roadworhy
> (vic), on the skiline78 frount disk brakes.
>
> And the struts out of the skiline, do they bolt strait into 1600? or do
you
> need some kind of an adaptor at the bottom? Ive seen them without an
> adaptor, but Ive also seen lots of skin been taken off (not mine of
course!)
> from from ppl trying to over tighten the bolts to hold the weight.
>
> Thanks
> Jordan
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
