David, I would probably go with something like S14 or S15 type turbo as they are within your budget and are much earlier spool up than the TO4's.I reckon this would compliment the grunty nature of a stroker and these turbos are good for 300 plus hp.The RB25 turbo is probably worth considering if you dont plan to run big boost and are available for $1300 new.I would only go for old school type turbos if you want a lot of hp and dont have the budget for the hi tech stuff. Andrew Smith
David Thompson wrote: > List, > I am after some guidance from some of the turbo guys on the list. I am going > to purchase a turbo, budget <$1000, second hand, and make up a steam pipe > manifold to suit. Here are my engine specs: > 2.4 l20b, > 7.8:1 cr, > Heaps of porting, > Over size valves, > EFI, > Water-air intercooler, > Redline 6800rpm, > >From the turbo, I want 14psi (for the moment). > I have seen a to4 with external waste gate for $900, however I am unsure of > the housing and wheel trims I require. > Any recommendations about wheel and housing sizing would be greatly > appreciated. > I would also be interested if anyone has a suitable turbo to sell. > Regards, > David Thompson. > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.; > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
