Hi, My block is 89mm,Its still in its bag under the bench,But it has been x-rayed before and after and the engine dude said its fine but no more rebore's. Some of the L20B blocks will take 89mm some wount.
Malcolm Chris Simpson wrote: >g'day all, > >Im currently having my L20 block machined to take the Z24 crank and im >wondering what others have done for pistons. > >I want to run forgies and a compression ratio of around 8-8.5:1. The plan >is that once its set up and get it running nicely on a single weber or >similar and then set up the EFI and turbo/supercharge it. > >The other thing is that i want to run a 88mm bore if possible, 89 is too >close for my liking to the water jacket, especially that im going to turbo >it, although i'll be happy to listen to those running a 89mm bore turbo L >series that think it works well. > >Chers Chris > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
