Do you have a contact for him or is he on the list? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Chris Howard Sent: Wednesday, 19 May 2004 1:20 PM To: [EMAIL PROTECTED] Subject: RE: tie rods
Engineers/RTA/Regency or whatever its called in your area will frown upon any cut and welded steering parts. Stewart wilkins sells longer ones ready made. Cheers, Chris Howard [EMAIL PROTECTED] http://turbovan.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > mark krawczuk > Sent: Wednesday, 19 May 2004 11:08 AM > To: [EMAIL PROTECTED] > Subject: Re: tie rods > > hi, i modified mine. i`ve sent u a couple pics of what i`ve done. > basicall ive cut it in the middle, the bit where the tie > rods screw onto, > then got some autoflex steel (cant remember how long, but i > think i ended > up with about a 6mm plus/minus 1mm thick wall) > ), got a hole bored down the middle, drilled some holes in the side . > > the bored hole is a snug fit for the adjuster. > then i put the ends in the auto flex, welded around the > ends, then plug > welded inthru the side holes to make sure the adj is securely held > together. > > mark k > > > > > ----- Original Message ----- > From: "Warren Phillip-Clarke" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, May 19, 2004 9:59 AM > Subject: tie rods > > > > Guys some help please. > > I have just wound on some nice negative camber on my rally > 1600 and now find > I may need longer tie rods so as to complete a wheel > alignment giving me > about 2 deg toe out, it would appear though that my tie rods > aren't going > to be long enough. > > Is there another model of vehicle with the same diameter and > thread pitch > etc with longer rods I can get off the shelf? > > Any help greatly appreciated and cost will be a factor at the moment. > > Wazza > > Warren Phillip-Clarke > SHRECK Motorsport > Rallying It's All Good! > Ph: 0401694264 > [EMAIL PROTECTED] > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
