What!!?! An MB suspension that doesn't hold up for a million miles?
Heresy!!! Burn him! Burn him!

Actually, I was thinking the same - stretching or deforming somewhere - but
that is a terrible thought.

Taking the car in for new tires and alignment today, I'll ask the shop but
they're tire/brake folks.  Maybe I should call the local MB wizard shop to
see what they think (they do a lot of body work).

-Max

-----Original Message-----
From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com]
On Behalf Of Dieselhead
Sent: Sunday, December 19, 2010 11:49 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] The continuing 124 rear suspension saga

I have pondered this phenomenon, but have no direct answer.  My 
suspicion is that maybe somehow the spring link (LCA) stretches under 
high mileage.  Perhaps the link mountings distort, but nothing is 
obvious.

With this phenomenon, I have not suspected springs as the springs and 
rubber seats appear ok, and the height seems ok.  I have NOT measured 
the height.

Perhaps a really good frame straightening shop can help.  They should 
have all the measurements etc.

A friend has a 00 volvo that has been crabbing really bad, and 
pulling to the left.  many alignment and "vovlo only" shops could not 
fix it or find a problem.  I suggested he find a frame straightening 
shop.  He took it in and they immediately found the problem and fixed 
it.  He is very happy now.

I CAN tell you that you are not alone.



>OK 124 (and 201) experts, here's my puzzle.  After replacing the four links
>and also the bushings at each end of the spring link, I STILL have negative
>camber on my 124 wagon.  It is better, but it's still there.  :(
>
>So, I've thought of a couple of causes and options.
>
>1) Eccentric bolt and elongated holes at the inner end of either the spring
>link or the camber link, and adjust the camber directly.  There is a note
in
>the Tech. Modification notes of the service manual that the very early 124
>cars had such an adjustment, but it was eliminated.
>
>2) Rear springs are worn out; Replace em!
>
>3) Rear spring pads are worn out; Replace em!
>
>How can I measure the ride height to determine if the negative camber is
due
>to decreased ride height?
>
>-Max (feeling a little negative)
>
>
>_______________________________________
>http://www.okiebenz.com
>For new and used parts go to www.okiebenz.com
>To search list archives http://www.okiebenz.com/archive/
>
>To Unsubscribe or change delivery options go to:
>http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to