could this be a problem on my 617?
On Tue, 29 Nov 2005 18:43:42 -0600, Marshall Booth <[EMAIL PROTECTED]>
wrote:
Zeitgeist wrote:
My OM603 has just now started to smoke (blue) so much so, that I think
I'll be parking her for some time. This started with excessive
smoking at startup, then progressed to a little puff of blue upon
acceleration and is now emitting a minor cloud on acceleration and at
idle. Methinks valve stem seals, a headgasket and turbo seals are in
order...or, I have a bent rod, or the head is toasty, or all of the
above.
I'd check the compression of #1 to see if the seal between the the
cylinder and the oil passage has failed.
Valve stem/seal problems producing the symptoms you describe are VERY
rare in OM60x engines even after 300-400kmi of service. Turbo seal
failures are also rather rare. 603.96 engines almost NEVER have shown up
with bent rods (I've heard of one or two).
Marshall
--
Luther KB5QHU
Alma, Ark
'83 300SD (happily running WVO/diesel mix)
'82 300CD (Slate grey, black MBTex, WVO/D mix)
'82 300D '90 300E (both parts or can run??)
