> clay monroe wrote: > All new wires and plugs with good spark all around. Cylinder > does not fail when ignition wires are removed. Compression is > within reason. Previously tested the injection loom and all > connections showed good power to each injector. Tests done by > removing wires to each injector, which identified the non > working part, Indy replaced the injector with a used good one > but he has no way to test individual injectors for pop or > operation. That did not fix it. > > No black smoke on start up, so all fuel is being burned.
As I recall from my M117, there are four injector drive channels. So if it's two cylinders that run or miss together it could be the controller. If it's only one, then it must be injector or wires. Is the miss always there? Or is it intermittent? -- Philip _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
