Microsoft has a version of Virtual PC for the MAC so you can run Windows on it and continue contributing to the Bill Gates retirement fund.
-Dave Walton On 1/2/06, Tom Hargrave <[EMAIL PROTECTED]> wrote: > Upgrade ....... to a new Mac????? > > LOL (Laughing Out Loud) > > Sorry, couldn't help myself. > > Mac's are great machines. I'd own one if I could purchase all of the > software I run for a Mac at a reasonable price. > > > Thanks, > Tom Hargrave > 256-656-1924 > www.kegkits.com > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Ed Booher > Sent: Monday, January 02, 2006 7:57 PM > To: [EMAIL PROTECTED]; Mercedes Discussion List > Subject: Re: [MBZ] computer question no mb > > On 1/2/06, Barry Stark <[EMAIL PROTECTED]> wrote: > > Sometimes pressing or tapping various > > places on the M/B seems to either correct the video or make it worse. > > Sounds to me a little like the board may have been damaged, most likely with > the addition or removal of a PC card. If pressing or tapping causes a > changes it means the print paths have breaks in them. > When you replace the board, make absolutely sure you use *all* the > motherboard stand offs the board has holes for, they are there to properly > support it. In fact, I've taken to adding non conductive / static free foam > (similar to what the board sits on when new, but usually that isn't thick > enough for support use) underneath all the ATX machines I work on for > friends / family / servers to provide even more support. > > I've cracked two boards completely in half because they were not properly > supported and like an idiot I was pressing down to get the card to seat and > *snap* > > Check out both http://www.geeks.com and http://www.newegg.com .. Geeks sells > refurbed and used stuff mostly, and they do not currently have a board that > will accept your RAM but they have new stock all the time. > > Or, you could take this opportunity to upgrade to a new Mac > > -- > Knowledge is power... Power Corrupts. Study hard... Be Evil. > > _______________________________________ > http://www.striplin.net > For new parts see official list sponsor: http://www.buymbparts.com/ For used > parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net > > > _______________________________________ > http://www.striplin.net > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net >
