On Wed, 22 Feb 2006 19:26:06 -0700 "Dave M." <[EMAIL PROTECTED]> wrote:
> Old spec was 5150rpm, +/- 150rpm, or 5000-5300. Later specs from the
> WIS specify +/- 250rpm, which is a 4900-5400 range. Both are limited
> by a setting inside the rear cover of the injection pump. I turned
> mine up to about 5300-5400.
Do you have to remove the injection pump to do that? When I had my
injection pump checked on a test stand in Albuquerque, the fellow
apparently turned down the governor and now I can't make it to the ticks
for each of the gears (especially frustrating for the big hill south of
Santa Fe where I used to be able to go up at the speed limit of 75).
Craig
---
Craig McCluskey
Present: 1982 240D/3.0 (Euro 1984 617.912 engine, 4-speed) 221 kmi
Past: 1964 190Dc
1972 220D/8
1972 220/8
1987 190E/2.3
/"\
\ / ASCII RIBBON CAMPAIGN "Friends don't send friends
X AGAINST HTML MAIL HTML email."
/ \ AND POSTINGS
http://www.fred.net/tds/longrange.html
http://pruffle.mit.edu/~ccarter/I_do_not_use_microsoft.html
