Yes, I've done that way as well. Michael E. Esh
> On Jul 30, 2017, at 2:32 PM, Dan Penoff via Mercedes <mercedes@okiebenz.com> > wrote: > > Get a 1/4” ratchet and an extension and use it from over the top of the brake > pedal stuff to run the bolt in. If you’re under there and look around you’ll > see what I’m talking about. > > It’s a total pig to get to but that was how I recall doing it on my 350SDL. > > -D > > >> On Jul 30, 2017, at 2:29 PM, Kaleb C. Striplin via Mercedes >> <mercedes@okiebenz.com> wrote: >> >> So after working on the cruise amp I had it just tucked up under the dash >> out of the way. Today I am trying to actually finish the install. It's held >> on to the brake pedal support my a single bolt but it's so awkward trying to >> work up under the dash of the 126 you have to be able to keep the bolt from >> pushing back in the mounting hole while at the same time placing the cruise >> amp/bracket back on the bolt then getting the nut back on. I have been at it >> a good while and still have not gotten it back on. Bolt keeps trying to push >> back and it's near impossible to hold it and put nut on at the same time. >> Maybe I should try pulling the cluster and doing it from the top >> >> Sent from my iPhone >> >> _______________________________________ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> > > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com