On Wed, 21 Mar 2018 23:00:33 -0500 Curley McLain via Mercedes <mercedes@okiebenz.com> wrote:
> As a last resort, I have clamped a vicegrip to hold the serp belt to > the fan pulley, so it can't slip. (OM603) I did use a vice grip, but I put a thin piece of wood between the belt and the jaw of the vice-grip to keep from chewing up the belt. I also looked up the spec for tightening: 40 - 45 Nm depending on where you look. I had thought it was 10 Nm and the torque I was exerting on it with the vice-grip/wood clamp was more than that, but maybe not 45 Nm (33 ft-lbf). Craig > > Craig via Mercedes <mailto:mercedes@okiebenz.com> > > March 21, 2018 at 10:51 PM > > On Wed, 21 Mar 2018 20:38:05 -0400 Max Dillon via Mercedes > > > > As a matter of fact, Max, I think I was the one who first discovered > > this. > > > > I looked through the W124 CD and finally found where mention is made > > of this: It's for the M104 engine (picture attached, upper right > > corner). > > > > From what the manual says, it doesn't apply to the OM602. I'll have a > > closer look at it tomorrow, but from what I remember from glancing at > > the water pump, I think that will be the case. _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com