Can you grind a slot in it then go at it with a chisel to rotate it a
bit or loosen it up with an air hammer?
--FT
On 7/7/19 2:47 PM, Kaleb Striplin via Mercedes wrote:
Tried both, no go. Will try extractor next then cut it off.
Sent from my iPhone
On Jul 7, 2019, at 1:33 PM, OK Don via Mercedes <mercedes@okiebenz.com> wrote:
Try the next size smaller - or a 12 pt socket and hammer it on ---
On Sun, Jul 7, 2019 at 12:36 PM Kaleb Striplin via Mercedes <
mercedes@okiebenz.com> wrote:
E torx
Sent from my iPhone
On Jul 7, 2019, at 12:20 PM, Rick Knoble via Mercedes <
mercedes@okiebenz.com> wrote:
Is it torx (internal star) or e-socket (external star)?
I've had good luck with using the correct size socket.
A slightly smaller (larger for external) one will fit and work, but if
one bolt is too tight, it will bugger the star up. Heading to HF later to
get a new set, myself.
I'm not sure the bolt extractor will work on those.
https://www.harborfreight.com/search?q=e%20socket%20set
Rick
Original Message
From: mercedes@okiebenz.com
Sent: July 7, 2019 12:09 PM
To: davesl...@okiebenz.com; mercedes@okiebenz.com
Reply-to: mercedes@okiebenz.com
Cc: ka...@striplin.net
Subject: Re: [MBZ] How to get off buggered up torx bolt?
I’m probably going to have to get a bolt extraction set, never had one
before surprisingly. Will those work on these crappy torx head bolts?
Sent from my iPhone
On Jul 7, 2019, at 11:55 AM, Kaleb Striplin <ka...@striplin.net> wrote:
I’m in the process of removing a read axle in order to replace the rear
wheel bearing. I have 5 of the 6 bolts out but of course 1 of them is
buggered up. The way the bolts are in relation to the axle boot near it it
is difficult to get a good solid grip on the without it slipping. If not
very careful you will round it off. Any idea on how to proceed? I’m not
sure I can just try cutting the head off because the axle must slip done
from the diff. I don’t think there is enough room to pull it off the bolt
stud then down.
Sent from my iPhone
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
--
OK Don
"Whenever you find yourself on the side of the majority, it is time to
pause and reflect." Mark Twain
"There are three kinds of men: The ones that learns by reading. The few who
learn by observation. The rest of them have to pee on the electric fence
for themselves."
WILL ROGERS, *The Manly Wisdom of Will Rogers*
2013 F150, 18 mpg
2017 Subaru Legacy, 30 mpg
1957 C182A, 12 mpg - but at 150 mph!
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
--
--FT
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com