Harbor Freight sells one set of wrenches that are really thin. I wouldn't use them for removing brake parts but they work really well for stuff like this. -Curt
On Friday, August 30, 2019, 9:50:24 AM EDT, Curley McLain via Mercedes <mercedes@okiebenz.com> wrote: When you are "done" go through and check every clearance again. If you find one "out," repeat as necessary until all are good. Not hard. You just need one thin 14mm open end and one standard open end. While the special tools may be nice, they are 100% unnecessary. Kevin Kraly via Mercedes wrote on 8/29/19 9:13 PM: > I have done one valve adjustment sequence before on a 1981 300CD back in > 2006. Before I adjusted them, they were so far out of adjustment that the car > wouldn’t even start! Afterward, I was able to get it started. I know that > this 240D is ready for one!! > Kevin in Hillsboro, OR > 1982 240D 191Kmi, ??? > > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com