If you can give me the dimensions, at thew bottom of the groove of both pulleys, the total height of the assembly and the inside diameter of the bore I may have one from a Gravely.

Manfred



Kaleb Striplin via Mercedes wrote:
Actually, the pulley is a top pulley that connects the top belt to the engine, and a bottom pulley that runs the blades. It is the top pulley that is bent and apparently it is an assembly that appears to cost close to $300. In other words, I really need to try to get this one bent back into closer to flat position.

On 9/7/2022 7:39 PM, Kaleb Striplin via Mercedes wrote:
Earlier this summer I removed the deck on my 54" riding mower to replace the belt. I was going to turn mower deck upside down to remove blades to sharpen them while I had it off and ended up dropping it. Deck hit the floor and broke an arm that holds the pulley on which is spring loaded to tighten the belt. I got a replacement arm from ebay and installed it. The thing is basically made out of pot metal. Anyway, it broke after about 5 minutes of mowing. Seller sent new arm but when I installed it I noticed the top pulley which connects the deck to mower was wobbling. In other words I must have bent it when I dropped it. I mowed a couple of times with it just fine and suddenly the arm broke again. I am assuming the wobble is vibrating the arm causing it to break. I am going to have to pull it apart again. Does anybody have any advice on trying to straighten it out? I am looking for a replacement now but if I can get this one back flat that would best as JD parts tend to be expensive.

_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com




_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to