I'd suggest cutting a groove in it with a Dremel tool for the screwdriver if
you can get in there with one.
Mike
----- Original Message -----
From: "Jim Cathey" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" <mercedes@okiebenz.com>
Sent: Saturday, December 02, 2006 5:31 PM
Subject: Re: [MBZ] Fw: Too much screwing around
I am a little slow. If I go with the left handed drill bit how is that
going to help me get a bite on this thing and remove it please.
Well, often when drilling left-handedly, the force of the bit,
especially if it 'bites' into the body can sometimes start backing
out the thing all on its own. Of course, if it makes it all the
way through without doing this then you've got an unpluggable
hole to deal with.
You might be able to carefully chisel a slot in it and then turn
it out with a big flat bladed screwdriver.
-- Jim
_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
