After a bit of hunting down, I did the modifications using the devtool helper and wrote my procedure down since I couldn't find a good guide online ( https://github.com/kratsg/meta-l1calo/wiki/Creating-a-patch-for-an-existing-recipe-source-file )
Thanks! Giordon On Sat, Nov 18, 2017 at 11:36 AM Giordon Stark <kra...@gmail.com> wrote: > That said, I found the config here: > https://github.com/Xilinx/u-boot-xlnx/blob/master/include/configs/xilinx_zynqmp_zcu102.h#L13 > and > just need to generate a bbappends that's only applied for a specific > machine. > > Giordon > > On Sat, Nov 18, 2017 at 11:16 AM Giordon Stark <kra...@gmail.com> wrote: > >> I'm also unable to run `bitbake -c menuconfig "virtual/bootloader". I >> think I run into a similar error as this SO post ( >> https://stackoverflow.com/questions/43211384/how-to-get-to-menuconfig-for-u-boot-in-yocto-environment >> ) >> >> ERROR: Task do_menuconfig does not exist for target virtual/bootloader >> (/local/d4/gstark/meta-xilinx/recipes-bsp/u-boot/u-boot-xlnx_2017.1.bb:do_menuconfig). >> Close matches: >> do_configure >> ERROR: Command execution failed: 1 >> >> Giordon >> >> On Sat, Nov 18, 2017 at 11:13 AM Giordon Stark <kra...@gmail.com> wrote: >> >>> (resending with right email, sorry for spam) Incredibly naive question >>> since I've been wondering about these things. Is it not possible to write >>> this as a patch or a .bbappends and put it in my meta layer (where?). I >>> assume the u-boot config is defined in meta-xilinx/classes or >>> meta-xilinx/conf as Xilinx maintains their own fork of u-boot I believe. >>> >>> >>> On Sat, Nov 18, 2017 at 10:27 AM Mike Looijmans <mike.looijm...@topic.nl> >>> wrote: >>> >>>> Basically boils down to disabling SD support in u-boot. >>>> >>>> In OE/Yocto, run "bitbake -c menuconfig virtual/bootloader" and remove >>>> the MMC option (and whatever other options you like). Save the >>>> configuration as /tmp/defconfig, and exit. Copy the defconfig to the >>>> u-boot recipe location and add a line to the SRC_URI to apply it while >>>> building. >>>> >>>> On 17-11-17 21:04, Giordon Stark wrote: >>>> > Is it possible to tell u-boot to not boot from MMC? I suspect it's a >>>> > configuration flag -- and this is when I try to program the QSPI using >>>> > my boot.bin and it would be beneficial to make that work. >>>> > >>>> > Thanks, >>>> > >>>> > Giordon >>>> > >>>> > >>>> >>>> >>>> -- >>>> Mike Looijmans >>>> >>>> >>>> Kind regards, >>>> >>>> Mike Looijmans >>>> System Expert >>>> >>>> TOPIC Products >>>> Materiaalweg 4, NL-5681 RJ Best >>>> Postbus 440, NL-5680 AK Best >>>> Telefoon: +31 (0) 499 33 69 79 <+31%20499%20336%20979> >>>> E-mail: mike.looijm...@topicproducts.com >>>> Website: www.topicproducts.com >>>> >>>> Please consider the environment before printing this e-mail >>>> >>>> >>>> >>>> -- >>>> _______________________________________________ >>>> meta-xilinx mailing list >>>> meta-xilinx@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/meta-xilinx >>>> >>>
-- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx
