Reprogrammed the board here using my patch ( https://github.com/kratsg/meta-l1calo/commit/2ddfbfa7a1d6c2a11c3035e3b0e504be793352fc) and u-boot still hangs at the MMC line. Is there something I missed?
Giordon On Sat, Nov 18, 2017 at 12:26 PM Giordon Stark <kra...@gmail.com> wrote: > After a bit of hunting down, I did the modifications using the devtool > helper and wrote my procedure down since I couldn't find a good guide > online ( > https://github.com/kratsg/meta-l1calo/wiki/Creating-a-patch-for-an-existing-recipe-source-file > ) > > Thanks! > > Giordon > > On Sat, Nov 18, 2017 at 11:36 AM Giordon Stark <kra...@gmail.com> wrote: > >> That said, I found the config here: >> https://github.com/Xilinx/u-boot-xlnx/blob/master/include/configs/xilinx_zynqmp_zcu102.h#L13 >> and >> just need to generate a bbappends that's only applied for a specific >> machine. >> >> Giordon >> >> On Sat, Nov 18, 2017 at 11:16 AM Giordon Stark <kra...@gmail.com> wrote: >> >>> I'm also unable to run `bitbake -c menuconfig "virtual/bootloader". I >>> think I run into a similar error as this SO post ( >>> https://stackoverflow.com/questions/43211384/how-to-get-to-menuconfig-for-u-boot-in-yocto-environment >>> ) >>> >>> ERROR: Task do_menuconfig does not exist for target virtual/bootloader >>> (/local/d4/gstark/meta-xilinx/recipes-bsp/u-boot/u-boot-xlnx_2017.1.bb:do_menuconfig). >>> Close matches: >>> do_configure >>> ERROR: Command execution failed: 1 >>> >>> Giordon >>> >>> On Sat, Nov 18, 2017 at 11:13 AM Giordon Stark <kra...@gmail.com> wrote: >>> >>>> (resending with right email, sorry for spam) Incredibly naive question >>>> since I've been wondering about these things. Is it not possible to write >>>> this as a patch or a .bbappends and put it in my meta layer (where?). I >>>> assume the u-boot config is defined in meta-xilinx/classes or >>>> meta-xilinx/conf as Xilinx maintains their own fork of u-boot I believe. >>>> >>>> >>>> On Sat, Nov 18, 2017 at 10:27 AM Mike Looijmans < >>>> mike.looijm...@topic.nl> wrote: >>>> >>>>> Basically boils down to disabling SD support in u-boot. >>>>> >>>>> In OE/Yocto, run "bitbake -c menuconfig virtual/bootloader" and remove >>>>> the MMC option (and whatever other options you like). Save the >>>>> configuration as /tmp/defconfig, and exit. Copy the defconfig to the >>>>> u-boot recipe location and add a line to the SRC_URI to apply it while >>>>> building. >>>>> >>>>> On 17-11-17 21:04, Giordon Stark wrote: >>>>> > Is it possible to tell u-boot to not boot from MMC? I suspect it's a >>>>> > configuration flag -- and this is when I try to program the QSPI >>>>> using >>>>> > my boot.bin and it would be beneficial to make that work. >>>>> > >>>>> > Thanks, >>>>> > >>>>> > Giordon >>>>> > >>>>> > >>>>> >>>>> >>>>> -- >>>>> Mike Looijmans >>>>> >>>>> >>>>> Kind regards, >>>>> >>>>> Mike Looijmans >>>>> System Expert >>>>> >>>>> TOPIC Products >>>>> Materiaalweg 4, NL-5681 RJ Best >>>>> Postbus 440, NL-5680 AK Best >>>>> Telefoon: +31 (0) 499 33 69 79 <+31%20499%20336%20979> >>>>> E-mail: mike.looijm...@topicproducts.com >>>>> Website: www.topicproducts.com >>>>> >>>>> Please consider the environment before printing this e-mail >>>>> >>>>> >>>>> >>>>> -- >>>>> _______________________________________________ >>>>> meta-xilinx mailing list >>>>> meta-xilinx@yoctoproject.org >>>>> https://lists.yoctoproject.org/listinfo/meta-xilinx >>>>> >>>>
-- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx