Hello, Holger, you said
>On Sun, Apr 23, 2000 at 04:33:45PM +0500, Dave W wrote:
>> In case you're interested, Miamiinit sets this string:
>> AT&F\Q3S71=2S80=0&C1&D0\r. The modem is a Zoom V.34. Miamiinit sets it at a
>> speed of 115200, which seems to work as well as any.
>MiamiInit does not set that string for a Zoom modem. The string you
>quoted is for ISDN modems only. This may explain your problems.
It did set that string, tho. I tried importing from MiamiInit several times,
and that string always ended up in the string window.
>Load a terminal program, type "AT&F", then "AT&C1" and "AT&W".
>After that load Miami, change the init string to "AT&F&D0\r", save
>the settings and try again.
>If you still have problems with Miami skipping dialing then this
>is because your modem cable is miswired. As a workaround disable
>"Use CD" in Miami and save the settings.
The init string seems to have fixed the problem. Out of curiosity, why would a
string that works for TermiteTCP not work in Miami? And why would it have
worked in Miami sometimes?
Anyway, thanks for the help.
PS. quickregister is working fine now too. Just used it to register, and it
took about 30 seconds. Now to go through the process of downloading the SSL
files.
--
To unsubscribe send "unsubscribe miami-talk-ml" to
"[EMAIL PROTECTED]". For help on list commands send "help" to
"[EMAIL PROTECTED]".
