How much "fender rake" is there for a flat underbody, on an NB?

--- On Tue, 3/10/09, Keith Tanner <[email protected]> wrote:
From: Keith Tanner <[email protected]>
Subject: RE: Suspension Rake effects
To: "Steve Kiffmeyer" <[email protected]>, "MiataPower" 
<[email protected]>, "SSCOR" <[email protected]>
Date: Tuesday, March 10, 2009, 9:24 PM




 
 
RE: Suspension Rake effects

 


If you measure the underside of the chassis, you'll discover that the 1/2" 
"rake" really isn't a rake at all. It's an artifact of the fender design.



If you lift the rear, you'll bias the car more towards oversteer/away from 
understeer.





-----Original Message-----

From: [email protected] on behalf of Steve Kiffmeyer

Sent: Tue 3/10/2009 5:42 PM

To: MiataPower; SSCOR

Subject: Suspension Rake effects



I am getting ready to do some major suspension overhauls on my 96 M-edition. 
Most folks have a higher lift on the rear than the back(rake). I have always 
had my car even front to back. About 12.25 inches wheel center to wheel arch.



Is there any difference in handling with a rake versus no rake for autocross?



Thanks



Steve



GC coil overs

KYB AGX 8-ways

FM rear shock extenders

15X6 stock wheels/ Toyo T1R 195/50/15 daily

15X7 /Kuhmo V710 205/50/15 autocross

FM 1 inch front anti-sway bar

stock 11 mm rear anti sway bar

autocross and daily driving only








 
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to