RE: Suspension Rake effectsWhere is the best place to measure the front vs rear 
underside height of the car....the 2 structural rails that run front to aft?
  ----- Original Message ----- 
  From: Keith Tanner 
  To: Steve Kiffmeyer ; MiataPower ; SSCOR 
  Sent: Wednesday, March 11, 2009 12:24 AM
  Subject: RE: Suspension Rake effects


  If you measure the underside of the chassis, you'll discover that the 1/2" 
"rake" really isn't a rake at all. It's an artifact of the fender design.

  If you lift the rear, you'll bias the car more towards oversteer/away from 
understeer.


  -----Original Message-----
  From: [email protected] on behalf of Steve Kiffmeyer
  Sent: Tue 3/10/2009 5:42 PM
  To: MiataPower; SSCOR
  Subject: Suspension Rake effects

  I am getting ready to do some major suspension overhauls on my 96 M-edition. 
Most folks have a higher lift on the rear than the back(rake). I have always 
had my car even front to back. About 12.25 inches wheel center to wheel arch.

  Is there any difference in handling with a rake versus no rake for autocross?

  Thanks

  Steve

  GC coil overs
  KYB AGX 8-ways
  FM rear shock extenders
  15X6 stock wheels/ Toyo T1R 195/50/15 daily
  15X7 /Kuhmo V710 205/50/15 autocross
  FM 1 inch front anti-sway bar
  stock 11 mm rear anti sway bar
  autocross and daily driving only



_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to