Hello Again,
I have tried adding my user to the staff group, but this did not help.
I looked at my ulimit, and it says it is unlimited.
I assure everyone, I have followed the docs to the letter. The system
is pristine with the exception that I am following the stable branch. I
have made no customizations to it what-so-ever, as I am not yet
comfortable with configuring OBSD (I don't want to move faster than the
docs, since I am still learning).
I have tried this on 3.6, and I am now running 3.7. The problem
remains. I am using kde 3.3.2 installed with pkg_add.
I have run KDE on linux systems for years (since kde 1.1) with no
troubles at all. This is one of several "bugs" or default
misconfigurations that seem to occur by default on OBSD. I have never
run into these problems before. I am at a loss. I'm sure the fix is
not too difficult, but I since there is no error output, I don't even
know where to look! (I don't see an strace for OBSD, so I don't know
what to use).
Again, everything (except sound, but that is another thread) seems to
work fine as root, it is only as a normal user that I run into these
other problems, like this crypto issue here.
I apologize for not giving my dmessage.
Thank you for your help.
Chris
dmesg:
======================================================================================
OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 299 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 267952128 (261672K)
avail mem = 238706688 (233112K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(7c) BIOS, date 11/17/99, BIOS32 rev. 0 @ 0xfd7a0
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK3021GAS>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8241B, 1.16> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 2 function 3 not configured
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1251 CardBus" rev 0x01: irq
11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1251 CardBus" rev 0x01: irq
11
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 6 function 0 not configured
"ESS SOLO-1 AudioDrive" rev 0x02 at pci0 dev 7 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x80
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x80
pcmcia1 at cardslot1
biomask fff5 netmask fff5 ttymask fff7
rd0: fixed, 3800 blocks
ep1 at pcmcia0 function 0 "3Com, OfficeConnect 572B, B" port 0xa000/32: address
00:00:86:62:83:f5
tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 10
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
syncing disks... done
rebooting...
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 299 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 267952128 (261672K)
avail mem = 237731840 (232160K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(7c) BIOS, date 11/17/99, BIOS32 rev. 0 @ 0xfd7a0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 76%
apm0: AC on, battery charge high, charging
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK3021GAS>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8241B, 1.16> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 2 function 3 not configured
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1251 CardBus" rev 0x01: irq
11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1251 CardBus" rev 0x01: irq
11
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 6 function 0 not configured
eso0 at pci0 dev 7 function 0 "ESS SOLO-1 AudioDrive" rev 0x02: ES1946 rev E,
irq 5
eso0: mapping Audio 1 DMA using VC I/O space at 0xfc70
audio0 at eso0
opl0 at eso0: model OPL3
midi0 at opl0: <ESO Yamaha OPL3>
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x80
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x80
pcmcia1 at cardslot1
biomask efd5 netmask efd5 ttymask ffd7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ep1 at pcmcia0 function 0 "3Com, OfficeConnect 572B, B" port 0xa000/32: address
00:00:86:62:83:f5
tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 10
wi0 at pcmcia1 function 0 "U.S. Robotics, IEEE 802.11b PC-CARD, Version 01.02"
port 0xa400/64
wi0: PRISM2 HWB3163 rev.A, Firmware 0.3.0 (primary), 1.7.1 (station), address
00:90:d1:08:44:7d
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
rebooting...
OpenBSD 3.6-stable (GENERIC) #1: Wed Sep 21 19:36:10 EDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 299 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 267952128 (261672K)
avail mem = 237719552 (232148K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(7c) BIOS, date 11/17/99, BIOS32 rev. 0 @ 0xfd7a0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 98%
apm0: AC on, battery charge high
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK3021GAS>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8241B, 1.16> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 2 function 3 not configured
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1251 CardBus" rev 0x01: irq
11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1251 CardBus" rev 0x01: irq
11
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 6 function 0 not configured
eso0 at pci0 dev 7 function 0 "ESS SOLO-1 AudioDrive" rev 0x02: ES1946 rev E,
irq 5
eso0: mapping Audio 1 DMA using VC I/O space at 0xfc70
audio0 at eso0
opl0 at eso0: model OPL3
midi0 at opl0: <ESO Yamaha OPL3>
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x80
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x80
pcmcia1 at cardslot1
biomask efd5 netmask efd5 ttymask ffd7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ep1 at pcmcia0 function 0 "3Com, OfficeConnect 572B, B" port 0xa000/32: address
00:00:86:62:83:f5
tqphy0 at ep1 phy 0: 78Q2120 10/100 media interface, rev. 10
wi0 at pcmcia1 function 0 "U.S. Robotics, IEEE 802.11b PC-CARD, Version 01.02"
port 0xa400/64
wi0: PRISM2 HWB3163 rev.A, Firmware 0.3.0 (primary), 1.7.1 (station), address
00:90:d1:08:44:7d
===================================================================================================
Stephan Tesch wrote:
>Am Sonntag, 25. September 2005 04:40 schrieben Sie:
>
>Hi Chris,
>
>
>
>>An error occurred while loading
>>https://webauth.comcast.net/auth/login?url=http%253A%252F%252Fwww.comcast.n
>>et%252Fqry%252Fgoto%253Fapp%253Dmail%2526CM.src%253Dtop:
>>
>>The process for the https://webauth.comcast.net protocol died unexpectedly.
>>
>>
>
>Nope, I cannot confirm this. Works for me.
>
>
>
>>At first, I thought it was simply a konqueror icompatability with the
>>specific website, but I soon found out this happened on all https
>>sites. After poking around, I went to settings:configure konqueror,
>>then I clicked on "Crypto". When I did that, the konqueror configurator
>>(or whatever you call the window that let's you configure konqueror)
>>crashed out entirely -- no errors.
>>
>>
>
>That works, too.
>
>
>
>>Interestingly enough, when I run Konqueror as root, this does not
>>happen. Therefore, somehow, this must be a permissions error -- but
>>since there is no error output, I have no idea where to look.
>>
>>
>
>Yep, try to raise your ulimits. KDE is kind of resource hungry. I run it with
>an account that's in the staff login class. You might want to try that. It
>would also be nice, if you tell us, which version of OpenBSD and KDE you are
>using.
>
>Stephan
