Hi misc@
I'm getting the following errors when running gimp-2.8.0p0 on OpenBSD
-current (Jun 28 i386 snapshot):
x41:fred ~> gimp reading.jpg
/usr/local/lib/gimp/2.0/plug-ins/file-jpeg: fatal error: Segmentation fault
(gimp:18542): LibGimpBase-WARNING **: gimp: gimp_wire_read(): error
This issue is only with opening jpeg files - I can create new files
and export them to jpeg or png or save the as .xcf files fine.
Any clues to debugging this issue further?
thanks
Fred
dmesg:
OpenBSD 5.2-beta (GENERIC) #251: Thu Jun 28 01:30:25 MDT 2012
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE,EST,TM2
real mem = 1600516096 (1526MB)
avail mem = 1563533312 (1491MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/14/06, BIOS32 rev. 0 @
0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (59 entries)
bios0: vendor IBM version "74ET61WW (2.06 )" date 03/14/2006
bios0: IBM 2525FAG
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xe800! 0xce800/0x1600 0xd0000/0x1000
0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1500, 1400, 1300,
1200, 1100, 1000, 900, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
mem address conflict 0x5f700000/0x80000
io address conflict 0x5800/0x8
io address conflict 0x5808/0x4
io address conflict 0x5810/0x8
io address conflict 0x580c/0x4
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: no ifp : irq 11
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 2
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
(0x4101): irq 11, address 00:16:d3:2f:63:7c
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 4
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 11
sdmmc0 at sdhc0
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05:
irq 11, address 00:16:6f:c1:16:40
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq
11, ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTC426060G9AT00>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA775, CB03> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-4200CL3 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 1 "IBM Hub" rev 2.00/0.01 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech
Trackball" rev 1.10/2.20 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (f6f5f64836073053.a) swap on wd0b dump on wd0b
scsibus3 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus3 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 1947MB, 512 bytes/sector, 3987456 sectors
