On Tue, Jul 3, 2012 at 2:35 PM, Fred Crowson <fred.crow...@gmail.com> wrote:
> Hi misc@
>
> I'm getting the following errors when running gimp-2.8.0p0 on OpenBSD
> -current (Jun 28 i386 snapshot):
>
> x41:fred ~> gimp reading.jpg
> /usr/local/lib/gimp/2.0/plug-ins/file-jpeg: fatal error: Segmentation fault
>
> (gimp:18542): LibGimpBase-WARNING **: gimp: gimp_wire_read(): error
>
> This issue is only with opening jpeg files - I can create new files
> and export them to jpeg or png or save the as .xcf files fine.
>
> Any clues to debugging this issue further?
>
> thanks
gimp has gone to sh!t as of late.
Here is how you get around this problem, if it is what I see once in a
while as well.
First quit gimp, then:
*** AT YOUR OWN RISK *** (or make a back up of this dir first):
$ rm -rf ~/.gimp-2.8/
Next, start gimp again.
For me, this resolves the issue, until gimp fsck's up again. It is
easy to get it into this state.
HTH,
--patrick
> Fred
>
> dmesg:
>
> OpenBSD 5.2-beta (GENERIC) #251: Thu Jun 28 01:30:25 MDT 2012
> t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel"
> 686-class) 1.60 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE,EST,TM2
> real mem = 1600516096 (1526MB)
> avail mem = 1563533312 (1491MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 03/14/06, BIOS32 rev. 0 @
> 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (59 entries)
> bios0: vendor IBM version "74ET61WW (2.06 )" date 03/14/2006
> bios0: IBM 2525FAG
> apm0 at bios0: Power Management spec V1.2
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/240 (13 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc0000/0xe800! 0xce800/0x1600 0xd0000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1500, 1400, 1300,
> 1200, 1100, 1000, 900, 800, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> mem address conflict 0x5f700000/0x80000
> io address conflict 0x5800/0x8
> io address conflict 0x5808/0x4
> io address conflict 0x5810/0x8
> io address conflict 0x580c/0x4
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> inteldrm0 at vga1: no ifp : irq 11
> drm0 at inteldrm0
> "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
> pci1 at ppb0 bus 2
> bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
> (0x4101): irq 11, address 00:16:d3:2f:63:7c
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci2 at ppb1 bus 4
> cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
> sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 11
> sdmmc0 at sdhc0
> iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05:
> irq 11, address 00:16:6f:c1:16:40
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq
> 11, ICH6 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTC426060G9AT00>
> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA775, CB03> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-4200CL3 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt2 at isa0 port 0x3bc/4: polled
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhub5 at uhub0 port 1 "IBM Hub" rev 2.00/0.01 addr 2
> uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech
> Trackball" rev 1.10/2.20 addr 3
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse1 at ums0 mux 0
> ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev
> 1.00/0.01 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a (f6f5f64836073053.a) swap on wd0b dump on wd0b
> scsibus3 at sdmmc0: 2 targets, initiator 0
> sd0 at scsibus3 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
> sd0: 1947MB, 512 bytes/sector, 3987456 sectors
