Hi all,

I'm running OpenBSD 5.6/amd64 on my fileserver. It has an APC UPS that was
previously managed with apcupsd. Since I upgraded to 5.6, the UPS now
attaches as a upd device:

$ dmesg | grep uhidev3
uhidev3 at uhub3 port 5 configuration 1 interface 0 "APC Back-UPS ES 450
FW:844.K2 .D USB FW:K2" rev 1.10/1.06 addr 2
uhidev3: iclass 3/0, 123 report ids
upd0 at uhidev3

And it reports sensible values in hw.sensors:
$ sysctl hw.sensors.upd0
hw.sensors.upd0.indicator0=On (Charging), OK
hw.sensors.upd0.indicator1=Off (Discharging), OK
hw.sensors.upd0.indicator2=On (ACPresent), OK
hw.sensors.upd0.indicator3=On (BatteryPresent), OK
hw.sensors.upd0.indicator4=Off (ShutdownImminent), OK
hw.sensors.upd0.percent0=79.00% (RemainingCapacity), OK
hw.sensors.upd0.percent1=100.00% (FullChargeCapacity), OK

So far, so good. Now, I'd like to configure sensorsd to monitor the device
and invoke a script when the power goes out. I have this line in
sensorsd.conf:

hw.sensors.upd0.indicator2:command=/etc/sensorsd/ups.sh %s %2

The ups.sh script currently just echoes the token values that it's passed
to a log file.

The issue I'm running into is this: the status of the sensors seems to
always be "OK", even when their state changes. I can unplug the UPS from
the wall and then I see this:

hw.sensors.upd0.indicator0=Off (Charging), OK
hw.sensors.upd0.indicator1=On (Discharging), OK
hw.sensors.upd0.indicator2=Off (ACPresent), OK
hw.sensors.upd0.indicator3=On (BatteryPresent), OK
hw.sensors.upd0.indicator4=Off (ShutdownImminent), OK
hw.sensors.upd0.percent0=76.00% (RemainingCapacity), OK
hw.sensors.upd0.percent1=100.00% (FullChargeCapacity), OK

We're not charging, we're discharging, AC power is not present, but none
of the status indicators (the %s token) ever leaves the "OK" state. As I
understand it, that lack of state change results in sensorsd doing
nothing, even though the sensor's value (the %2 token, On/Off) changes.

Can anyone clue me in? I feel like I must be missing something silly and
obvious here.

Thanks,

-- 
Joe Gidi
j...@entropicblur.com

"You cannot buy skill." -- Ross Seyfried

Reply via email to