Sorry.
I will try to clear this up.
My problem is:
I setup a openbsd box, and setup vmm.
After one week, I noticed that one of my vms had shutdown.
I started it back up again without thinking so much about it.
After a few days my other vm had shutdown.
Then I thought maybe it was an error in the snapshot I ran, so I upgraded
it to a newer -current.
After one week both my vms had shutdown.
I upgraded the host to the newest -current (10/10/2017) and then one of my
vms wouldnt even start.
Upgraded the host to the 10/11/2017 snapshot and got both to boot.
I upgraded one of the vms to the newest current without trouble.
Then I tried the other one, and it boots the vm, but when I tried to to use
the console and -b flag to boot the bsd.rd it hangs after I do U for
upgrade.
As Mike said it could be a issue with the console hanging, and if I try to
start it again it will reset my vm.
The problem is that after it hang, I do doas vmctl status on my host and it
shows that the vm isnt running anymore, so it seems not to only be a issue
with the console hanging, it actually shuts my vm down.
Heres my dmesg after the vm shutdown:
ode 6
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
pch fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
syncing disks... done
reboot
OpenBSD 6.2-current (GENERIC.MP) #139: Mon Oct 9 23:03:03 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16835751936 (16055MB)
avail mem = 16318648320 (15562MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
bios0: ASUSTeK COMPUTER INC. P8H77-V LE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.41 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 3400004199 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 3400027400 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus 1 (PEG0)
acpiprt9 at acpi0: bus -1 (PEG1)
acpiprt10 at acpi0: bus -1 (PEG2)
acpiprt11 at acpi0: bus -1 (PEG3)
acpiprt12 at acpi0: bus 3 (RP05)
acpiprt13 at acpi0: bus 4 (RP06)
acpiprt14 at acpi0: bus 5 (PXSX)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
(0x4800), msi, address 60:a4:4c:ad:8a:41
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
pci5 at ppb4 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
15=00 16=1c 17=65 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
20=00 21=00 22=03 23=57 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
04=0000 05=0000 06=00f6 07=f6f6
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
pch fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
syncing disks... done
reboot
OpenBSD 6.2-current (RAMDISK_CD) #138: Tue Oct 10 12:34:02 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16835751936 (16055MB)
avail mem = 16321761280 (15565MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
bios0: ASUSTeK COMPUTER INC. P8H77-V LE
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.44 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus 1 (PEG0)
acpiprt9 at acpi0: bus -1 (PEG1)
acpiprt10 at acpi0: bus -1 (PEG2)
acpiprt11 at acpi0: bus -1 (PEG3)
acpiprt12 at acpi0: bus 3 (RP05)
acpiprt13 at acpi0: bus 4 (RP06)
acpiprt14 at acpi0: bus 5 (PXSX)
acpiec0 at acpi0: not present
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
"INT3F0D" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
(0x4800), msi, address 60:a4:4c:ad:8a:41
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
pci5 at ppb4 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel H77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
"Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay1
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087
product 0x0024" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087
product 0x0024" rev 2.00/0.00 addr 2
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 6.2-current (GENERIC.MP) #140: Tue Oct 10 12:29:44 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16835751936 (16055MB)
avail mem = 16318656512 (15562MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
bios0: ASUSTeK COMPUTER INC. P8H77-V LE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.45 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 3400008118 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 3400018000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus 1 (PEG0)
acpiprt9 at acpi0: bus -1 (PEG1)
acpiprt10 at acpi0: bus -1 (PEG2)
acpiprt11 at acpi0: bus -1 (PEG3)
acpiprt12 at acpi0: bus 3 (RP05)
acpiprt13 at acpi0: bus 4 (RP06)
acpiprt14 at acpi0: bus 5 (PXSX)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
(0x4800), msi, address 60:a4:4c:ad:8a:41
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
pci5 at ppb4 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
15=00 16=1c 17=65 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
20=00 21=00 22=03 23=57 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
04=0000 05=0000 06=00f6 07=f6f6
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
pch fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
syncing disks... done
rebooting...
OpenBSD 6.2-current (GENERIC.MP) #140: Tue Oct 10 12:29:44 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16835751936 (16055MB)
avail mem = 16318644224 (15562MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
bios0: ASUSTeK COMPUTER INC. P8H77-V LE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.47 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 3400014278 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 3400021400 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus 1 (PEG0)
acpiprt9 at acpi0: bus -1 (PEG1)
acpiprt10 at acpi0: bus -1 (PEG2)
acpiprt11 at acpi0: bus -1 (PEG3)
acpiprt12 at acpi0: bus 3 (RP05)
acpiprt13 at acpi0: bus 4 (RP06)
acpiprt14 at acpi0: bus 5 (PXSX)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
(0x4800), msi, address 60:a4:4c:ad:8a:41
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
pci5 at ppb4 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
15=00 16=1c 17=65 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
20=00 21=00 22=03 23=56 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
04=0000 05=0000 06=00f6 07=f6f6
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
pch fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
syncing disks... done
rebooti
OpenBSD 6.2-current (GENERIC.MP) #140: Tue Oct 10 12:29:44 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16835735552 (16055MB)
avail mem = 16318627840 (15562MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb8c0 (107 entries)
bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
bios0: ASUSTeK COMPUTER INC. P8H77-V LE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.47 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 3400006159 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3399.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3399.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3399.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 3400011560 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus 1 (PEG0)
acpiprt9 at acpi0: bus -1 (PEG1)
acpiprt10 at acpi0: bus -1 (PEG2)
acpiprt11 at acpi0: bus -1 (PEG3)
acpiprt12 at acpi0: bus 3 (RP05)
acpiprt13 at acpi0: bus 4 (RP06)
acpiprt14 at acpi0: bus 5 (PXSX)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
(0x4800), msi, address 60:a4:4c:ad:8a:41
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
pci5 at ppb4 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee2b267d2e0
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus1 targ 2 lun 0: <ATA, Verbatim SATA-II, 5.0.> SCSI3
0/direct fixed naa.0000000000000000
sd1: 244198MB, 512 bytes/sector, 500118192 sectors, thin
sd2 at scsibus1 targ 3 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee25d122c87
sd2: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd3 at scsibus1 targ 4 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee25d1226b9
sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
15=00 16=1d 17=64 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
20=00 21=00 22=03 23=56 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
04=0000 05=0000 06=00f6 07=f6f6
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
pch fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (d2e56583ccf86119.a) swap on sd1b dump on sd1b
syncing disks... done
rebooti
OpenBSD 6.2-current (GENERIC.MP) #140: Tue Oct 10 12:29:44 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16835735552 (16055MB)
avail mem = 16318631936 (15562MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb8c0 (107 entries)
bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
bios0: ASUSTeK COMPUTER INC. P8H77-V LE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.45 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 3400009278 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 3400019480 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus 1 (PEG0)
acpiprt9 at acpi0: bus -1 (PEG1)
acpiprt10 at acpi0: bus -1 (PEG2)
acpiprt11 at acpi0: bus -1 (PEG3)
acpiprt12 at acpi0: bus 3 (RP05)
acpiprt13 at acpi0: bus 4 (RP06)
acpiprt14 at acpi0: bus 5 (PXSX)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
(0x4800), msi, address 60:a4:4c:ad:8a:41
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
pci5 at ppb4 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee2b267d2e0
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus1 targ 2 lun 0: <ATA, Verbatim SATA-II, 5.0.> SCSI3
0/direct fixed naa.0000000000000000
sd1: 244198MB, 512 bytes/sector, 500118192 sectors, thin
sd2 at scsibus1 targ 3 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee25d122c87
sd2: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd3 at scsibus1 targ 4 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee25d1226b9
sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
15=00 16=1c 17=65 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
20=00 21=00 22=05 23=56 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
04=0000 05=0000 06=00f6 07=f6f6
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
pch fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (d2e56583ccf86119.a) swap on sd1b dump on sd1b
syncing disks... done
rebooti
OpenBSD 6.2-current (GENERIC.MP) #140: Tue Oct 10 12:29:44 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16835735552 (16055MB)
avail mem = 16318631936 (15562MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb8c0 (107 entries)
bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
bios0: ASUSTeK COMPUTER INC. P8H77-V LE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.47 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 3399996480 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 3400023400 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus 1 (PEG0)
acpiprt9 at acpi0: bus -1 (PEG1)
acpiprt10 at acpi0: bus -1 (PEG2)
acpiprt11 at acpi0: bus -1 (PEG3)
acpiprt12 at acpi0: bus 3 (RP05)
acpiprt13 at acpi0: bus 4 (RP06)
acpiprt14 at acpi0: bus 5 (PXSX)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
(0x4800), msi, address 60:a4:4c:ad:8a:41
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
pci5 at ppb4 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee2b267d2e0
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus1 targ 2 lun 0: <ATA, Verbatim SATA-II, 5.0.> SCSI3
0/direct fixed naa.0000000000000000
sd1: 244198MB, 512 bytes/sector, 500118192 sectors, thin
sd2 at scsibus1 targ 3 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee25d122c87
sd2: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd3 at scsibus1 targ 4 lun 0: <ATA, WDC WD20EARX-00P, 51.0> SCSI3
0/direct fixed naa.50014ee25d1226b9
sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
15=00 16=1c 17=65 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
20=00 21=00 22=05 23=57 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
04=0000 05=0000 06=00f6 07=f6f6
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
pch fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
USB Keyboard" rev 1.10/1.21 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (d2e56583ccf86119.a) swap on sd1b dump on sd1b
Here is the error I get when I run vmd in verbose mode:
startup
proc_compose_imsg: about to compose_event to proc 2
proc_compose_imsg: about to compose_event to proc 1
proc_compose_imsg: about to compose_event to proc 3
proc_compose_imsg: about to compose_event to proc 1
proc_compose_imsg: about to compose_event to proc 3
proc_compose_imsg: about to compose_event to proc 2
/etc/vm.conf:3: switch "uplink" registered
proc_compose_imsg: about to compose_event to proc 3
proc_compose_imsg: about to compose_event to proc 3
vm_priv_brconfig: interface bridge0 description switch1-uplink
proc_compose_imsg: about to compose_event to proc 3
vm_priv_brconfig: interface bridge0 add re0
proc_compose_imsg: about to compose_event to proc 3
proc_compose_imsg: about to compose_event to proc 3
config_setconfig: setting config
proc_compose_imsg: about to compose_event to proc 1
proc_compose_imsg: about to compose_event to proc 2
proc_compose_imsg: about to compose_event to proc 3
config_getconfig: retrieving config
config_getconfig: retrieving config
config_getconfig: retrieving config
proc_compose_imsg: about to compose_event to proc 0
vm_register: registering vm 1
vm_opentty: vm marianne tty /dev/ttyp2 uid 0 gid 4 mode 620
proc_compose_imsg: about to compose_event to proc 2
proc_compose_imsg: about to compose_event to proc 2
proc_compose_imsg: about to compose_event to proc 2
proc_compose_imsg: about to compose_event to proc 2
vm_register: registering vm 1
proc_compose_imsg: about to compose_event to proc 0
proc_compose_imsg: about to compose_event to proc 1
proc_compose_imsg: about to compose_event to proc 3
vm_priv_ifconfig: interface tap0 description vm1-if0-marianne
proc_compose_imsg: about to compose_event to proc 3
vm_priv_ifconfig: interface bridge0 add tap0
proc_compose_imsg: about to compose_event to proc 3
proc_compose_imsg: about to compose_event to proc 3
proc_compose_imsg: about to compose_event to proc 3
proc_compose_imsg: about to compose_event to proc 3
marianne: started vm 1 successfully, tty /dev/ttyp2
loadfile_elf: loaded ELF kernel
run_vm: initializing hardware for vm marianne
virtio_init: vm "marianne" vio0 lladdr fe:e1:bb:d1:0f:43
run_vm: starting vcpu threads for vm marianne
vcpu_reset: resetting vcpu 0 for vm 1
run_vm: waiting on events for VM marianne
vcpu_process_com_lcr: set baudrate = 9600
i8259_write_datareg: master pic, reset IRQ vector to 0x20
i8259_write_datareg: slave pic, reset IRQ vector to 0x28
vcpu_exit_i8253: channel 0 reset, mode=7, start=11932
virtio_blk_io: device reset
virtio_net_io: device reset
vcpu_process_com_lcr: set baudrate = 9600
vcpu_process_com_lcr: set baudrate = 9600
vmd: vm 1 event thread exited unexpectedly
vmm_sighdlr: handling signal 20
vmm_sighdlr: attempting to terminate vm 1
terminate_vm: terminating vmid 1
proc_compose_imsg: about to compose_event to proc 0
vmm_sighdlr: calling vm_remove
vm_remove: removing vm id 1 from running config
vm_remove: calling vm_stop
vm_stop: stopping vm 1
vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 1
Here is my vm.conf:
switch "uplink" {
add re0
}
My network bridge:
add re0
add vether0
up
fwddelay 4
!sleep 2
!dhclient vether0
I start the vm with this command:
doas vmctl start "marianne" -c -b ~/upgrade/bsd.rd -m 2G -n "uplink" -d
/mnt/disk1/vmm/marianne/disk.img <--- This is for upgrading the vm to the
latest current.
I hope this was a bit clearer.
Im not use to this kind of bug report, and I try my best to learn.
Roar
2017-10-12 9:57 GMT+02:00 Mike Larkin <mlar...@azathoth.net>:
> On Thu, Oct 12, 2017 at 09:44:07AM +0200, Roar Waagsbø wrote:
> > Hi.
> >
> > No the console is not stuck.
> >
> > I check doas vmctl status right after its stuck and its gone.. So I dont
> > run it again.
> >
> > So its not just a stuck console im afraid, it shut downs my vm :/
> >
> > Not sure? Just what I read in the documentation and guide.
> >
> > Its just for booting a new bsd.rd to upgrade to a newer -current.
> >
> > I be happy to do it otherwise if you might explain it to me?
> >
> > Roar
> >
>
> I don't know what you are trying to accomplish. You've given contradictory
> reports, and some reports with no useful information at all. What you wrote
> above doesn't match what you wrote earlier, or you're not explaining it
> enough.
>
> Regardless, I don't think I'll be able to help you clear this up. Perhaps
> if you
> send a proper bug report like I suggested in my very first reply, someone
> would
> feel motivated to help. At this point, I'm pretty exhausted trying to pull
> bits
> of information from you on each successive email.
>
> -ml
>
> > 2017-10-12 9:21 GMT+02:00 Mike Larkin <mlar...@azathoth.net>:
> >
> > > On Thu, Oct 12, 2017 at 09:16:39AM +0200, Roar Waagsbø wrote:
> > > > Hi.
> > > >
> > > > I've enabled the AHCI in bios now.
> > > >
> > > > I started the vm now, and downloaded the newest -current and that
> worked.
> > > >
> > > > But when I do -c -b to boot I get into console and after a while it
> just
> > > > stops.
> > > >
> > > > I get into console, press U for upgrade and then it hangs here:
> > > >
> > > > Welcome to the OpenBSD/amd64 6.2 installation program.
> > > > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? u
> > > > At any prompt except password prompts you can escape to a shell by
> > > > typing '!'. Default answers are shown in []'s and are selected by
> > > > pressing RETURN. You
> > > >
> > > > And the VM is shut down.
> > > >
> > >
> > > No, the console is stuck.
> > >
> > > > I ran vmd with -dvvv now and when it crashes I get this error:
> > > >
> > > > vmd: vm 4 event thread exited unexpectedly
> > > > vmm_sighdlr: handling signal 20
> > > > vmm_sighdlr: attempting to terminate vm 1
> > > > terminate_vm: terminating vmid 4
> > > > proc_compose_imsg: about to compose_event to proc 0
> > > > vmm_sighdlr: calling vm_remove
> > > > vm_remove: removing vm id 1 from running config
> > > > vm_remove: calling vm_stop
> > > > vm_stop: stopping vm 1
> > > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 1
> > > >
> > > >
> > >
> > > Entirely expected because vmd was still running, and you ran it again.
> It
> > > cleaned up your VM that you ran manually.
> > >
> > > You could have saved yourself a lot of time had you just scanned the
> > > lists. The
> > > stuck console is a known issue.
> > >
> > > There is no need to run VMs with -b anymore, either. Why are you doing
> it
> > > this way?
> > >
> > > -ml
> > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > 2017-10-11 18:48 GMT+02:00 Mike Larkin <mlar...@azathoth.net>:
> > > >
> > > > > On Wed, Oct 11, 2017 at 10:27:04AM +0200, Roar Waagsbø wrote:
> > > > > > Hi.
> > > > > >
> > > > > > Architecture is: amd64
> > > > > >
> > > > > > dmesg:
> > > > > > http://dpaste.com/0MEFBGT
> > > > > >
> > > > > > My scripts for starting my vms:
> > > > > > 1st vm: http://dpaste.com/0CN3JTD
> > > > > > 2nd vm: http://dpaste.com/3XXNCE7
> > > > > >
> > > > > > Vm.conf: http://dpaste.com/2QZA4FG
> > > > > >
> > > > > > Hostname.bridge0: http://dpaste.com/07FJP0X
> > > > > >
> > > > > > I run openbsd as guest vms on both
> > > > > >
> > > > > > I have 2 vms.
> > > > > >
> > > > > > I started vmd with -dvvv now and it gave me this error a little
> while
> > > > > after
> > > > > > starting my vm:
> > > > > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 1
> > > > > >
> > > > > >
> > > > >
> > > > > if you start the vm with the -c option for vmctl, what's displayed
> on
> > > the
> > > > > console
> > > > > as the vm terminates?
> > > > >
> > > > > I'm guessing you forgot to set tty com0 in boot.conf and it just
> > > reboots
> > > > > immediately.
> > > > >
> > > > > -ml
> > > > >
> > > > > > I hope this is enough info.
> > > > > >
> > > > > > And sorry for my terrible first post.
> > > > > >
> > > > > > Will try to get better at it
> > > > > >
> > > > > > 2017-10-10 21:11 GMT+02:00 Carlos Cardenas <cardena...@gmail.com
> >:
> > > > > >
> > > > > > > On 10/10/17 11:57, Roar Waagsbø wrote:
> > > > > > > > Hi.
> > > > > > > >
> > > > > > > > Sorry.
> > > > > > > >
> > > > > > > > Its my first report.
> > > > > > > >
> > > > > > > > Im not even sure its a bug or if its me doing something
> wrong.
> > > > > > > >
> > > > > > > > The logs arent saying much either, besides the one line I
> posted.
> > > > > > > >
> > > > > > > > Roar
> > > > > > > >
> > > > > > > > On Oct 10, 2017 5:21 PM, "Mike Larkin" <mlar...@azathoth.net
> >
> > > wrote:
> > > > > > > >
> > > > > > > >> On Tue, Oct 10, 2017 at 02:39:05PM +0200, Roar Waagsbř
> wrote:
> > > > > > > >>> Hi.
> > > > > > > >>>
> > > > > > > >>> I starting using openbsd a while back and I was told on
> > > > > > > #openbsd@freenode
> > > > > > > >>> that vmm was the way to go, and not use qemu.
> > > > > > > >>>
> > > > > > > >>> I want to use openbsd on my host machine.
> > > > > > > >>>
> > > > > > > >>> I setup two vms and it worked fine.
> > > > > > > >>>
> > > > > > > >>> After about a week I noticed that one of my vms was
> shutdown.
> > > > > > > >>>
> > > > > > > >>> I started it back up again and didnt give it much thought.
> > > > > > > >>>
> > > > > > > >>> After a few days my other vm was shut down.
> > > > > > > >>>
> > > > > > > >>> Then after a few days again both my vms was shutdown.
> > > > > > > >>>
> > > > > > > >>> Today I upgraded the host to a new -current snapshot
> > > (10/10/2017)
> > > > > > > >>>
> > > > > > > >>> And when I start my vm now, it says that it starts
> > > successfully,
> > > > > then
> > > > > > > >> after
> > > > > > > >>> a few seconds it is shutdown again.
> > > > > > > >>>
> > > > > > > >>> I started vmd with -d (tried -dv but it said that -v wasnt
> an
> > > > > options,
> > > > > > > >> even
> > > > > > > >>> though man vmd say so)
> > > > > > > >>>
> > > > > > > >>> And the only thing /var/log/daemon says was:
> > > > > > > >>>
> > > > > > > >>> vmd2: vm2 even trhead exited unexpectedly.
> > > > > > > >>>
> > > > > > > >>> Am I missing something?
> > > > > > > >>>
> > > > > > > >>> Or am I doing anything wrong?
> > > > > > > >>>
> > > > > > > >>> Regards Roar
> > > > > > > >>
> > > > > > > >> Your bug report is horrible.
> > > > > > > >>
> > > > > > > >> man sendbug
> > > > > > > >>
> > > > > > > >> -ml
> > > > > > > >>
> > > > > > >
> > > > > > > Roar,
> > > > > > >
> > > > > > > Let's start with this:
> > > > > > > * You said you are running -current (2017-10-10), which
> > > architecture
> > > > > > > (amd64 or i386)? A dmesg would be good.
> > > > > > > * What are your VM params (i.e. how did you start them)? Do you
> > > have a
> > > > > > > vm.conf file you can share?
> > > > > > > * What guest VMs are you running?
> > > > > > > * How many vmd's are you running? (asking because of the "vmd2:
> > > ...."
> > > > > > > line) There should be only one.
> > > > > > >
> > > > > > > If you are going to run vmd in the foreground, make sure no
> other
> > > vmd
> > > > > > > instances are running.
> > > > > > >
> > > > > > > I don't understand your comment about '-v' since not only is it
> > > > > present in
> > > > > > > the usage of vmd but also
> > > > > > > in the man page (man vmd).
> > > > > > >
> > > > > > > los@rollo:% doas vmd -h
> > > > > > > vmd: unknown option -- h
> > > > > > > usage: vmd [-dnv] [-D macro=value] [-f file]
> > > > > > >
> > > > > > > Either way, run vmd in the foreground with '-dvvv' as in:
> > > > > > > doas vmd -dvvv
> > > > > > >
> > > > > > > Once you're able to share all of that info then we can start
> the
> > > > > process
> > > > > > > of troubleshooting.
> > > > > > >
> > > > > > > +--+
> > > > > > > Carlos
> > > > > > >
> > > > >
> > >
>
