David Gwynne wrote:
> On Thu, Jul 19, 2007 at 12:29:51PM +0100, Nick Humphrey wrote:
>> I am having trouble with installing OpenBSD 4.1 on a new amd64 server
>> with an Areca ARC-1210 raid card. When I boot from the 4.1 CD install
>> media, everything seems fine up until it reaches" rd0: fixed, xxxx
>> blocks" and then the system hangs. I have downloaded the latest amd64
>> current snapshot from the mirrors and tried booting from that too - same
>> result.
>>
>> System:
>> - Gigabyte GA-M61PM-S2 (rev. 1.0) (BIOS Updated to latest F7 release)
>> - Areca ARC-1210 SATA RAID PCI-Express (firmware updated to V1.43
>> 2007-04-17)
>> - 2 x 400GB SATA Disks
>>
>> I have setup RAID 1 mirror of the two disks in the RAID BIOS. (Areca
>> card and drives detected by and usable in Linux and Windows XP). Without
>> the ARC-1210 card installed and the disks wired to the on-board SATA
>> controller everything works fine (i.e. I am able to install OpenBSD). I
>> have tried disabling on-board LAN and on-board SATA in the BIOS. I have
>> also tried enabling ACPI at boot time with ( -c, UKC> enable acpi, quit
>> ) which produces same result. In addition I have tried booting with the
>> i386 release media, and experienced exactly the same problem.
>
> can you show me a dmesg from this box with acpi enabled?
>
> dlg
>
<snip>
David,
Please find below dmesg from 4.1-RELEASE with acpi enabled.
Kind regards,
Nick
boot> -c
booting cd0a:/4.1/amd64/bsd.rd: 2169728+438535+2270160+0+330160
[80+220056+135431]=0x94f9a0
entry point at 0x1001e0 [7205c766, 34000004, 24448b12,
2840a304]*Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.1 (RAMDISK_CD) #1054: Sat Mar 10 19:32:06 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2079911936 (2031164K)
avail mem = 1778188288 (1736512K)
using 22937 buffers containing 208199680 bytes (203320K) of memory
User Kernel Config
UKC> enable acpi
136 acpi0 enabled
UKC> quit
Continuing...
mainbus0 (root)
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP SSDT HPET MCFG APIC
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+, 2612.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: PowerNow! K8 2612 MHz: speeds: 2600 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured
"NVIDIA MCP61 ISA" rev 0xa2 at pci0 dev 1 function 0 not configured
"NVIDIA MCP61 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
"NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: irq 11
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1
pci1 at ppb0 bus 1
skc0 at pci1 dev 7 function 0 "D-Link Systems DGE-530T B1" rev 0x11,
Yukon Lite (0x9): irq 10
sk0 at skc0 port A, address 00:15:e9:aa:d3:34
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-2510A, 2.16> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x07
pci3 at ppb2 bus 3
arc0 at pci3 dev 14 function 0 "Areca ARC-1210" rev 0x00: irq 11
arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17
scsibus1 at arc0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <Areca, ARC-1210-VOL#00, R001> SCSI3
0/direct fixed
sd0: 381469MB, 58128 cyl, 28 head, 480 sec, 512 bytes/sec, 781249536 sec
total
ppb3 at pci2 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x07
pci4 at ppb3 bus 4
vga1 at pci0 dev 13 function 0 "NVIDIA GeForce 6100 nForce 430" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 3584 blocks
--------------------------------------------------------------
End.
