Just out of curiosity, humor me, run qemu as root with the following added
options:
-net nic,vlan=0 -net tap,vlan=0
I've observed that at some point user mode networking has started segv'ed on
amd64 when running any qemu guest, and am sorry to report I have not yet
tracked down the source of the issue..
Please let me know if you have other experiences.
Thanks,
--
Todd Fries .. [EMAIL PROTECTED]
_____________________________________________
| \ 1.636.410.0632 (voice)
| Free Daemon Consulting, LLC \ 1.405.227.9094 (voice)
| http://FreeDaemonConsulting.com \ 1.866.792.3418 (FAX)
| "..in support of free software solutions." \ 250797 (FWD)
| \
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
37E7 D3EB 74D0 8D66 A68D B866 0326 204E 3F42 004A
http://todd.fries.net/pgp.txt
Penned by Frank Bax on 20081103 21:07.44, we have:
> I've been using qemu to run a Win98 guest on i386 host for about a year.
> On Aug.2, I installed an i386 snapshot that was a few days old. Since
> then, I've been running a Win98 guest on qemu-0.9.1p3 with no issues.
>
> Sometime over the past 12 months I realised I could be running amd64 on
> my Core2Duo processor; so (using purchased cdrom's) I made the switch to
> 8.4 amd64 release over the weekend. Not sure if I did it correctly; but
> I did it as an upgrade, then deleted and added all packages. Seems to
> be working fine so far; except for some problems with qemu.
>
> I notice that both -no-kqemu and -kernel-kqemu result in "invalid option".
>
> Am I allowed to run a guest like Win98 on host running amd64? It seems
> to work ok when running a couple of apps (win & dos); as long as there
> is no network access.
>
> The Win98 guest system crashes (segmentation fault, core dumped) when I
> access internet from the guest. This can be either accessing a website
> with IE or running pscp (an scp program for windows, from makers of
> PuTTY). Ping does not cause guest to crash.
>
> Ping to 10.0.2.2 (host) works (time is 1ms). Ping to internet ip
> address results in "Request timed out". Ping to name does manage dns
> lookup; but still gets "Request timed out".
>
> When the Win98 guest crashes; my mouse pointer goes with it. I'm using
> icewm. I manage to shutdown other apps with keyboard shortcuts; then
> restart X. Is there a way to get mouse pointer back?
>
> kqemu is not installed.
>
> I don't know what other information about this issue to include here.
>
> I'm not sure if a dmesg is appropriate; but here it is:
>
> OpenBSD 4.4 (GENERIC.MP) #1812: Tue Aug 12 17:22:53 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 3206639616 (3058MB)
> avail mem = 3109740544 (2965MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
> bios0: vendor LENOVO version "7IET30WW (1.11 )" date 07/13/2007
> bios0: LENOVO 8744J2U
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT
> SSDT SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4)
> EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3)
> HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1994.62 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,LONG
> cpu0: 4MB 64b/line 16-way L2 cache
> cpu0: apic clock running at 166MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1994.34 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,LONG
> cpu1: 4MB 64b/line 16-way L2 cache
> ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus 4 (EXP2)
> acpiprt5 at acpi0: bus 12 (EXP3)
> acpiprt6 at acpi0: bus 21 (PCI1)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2
> acpicpu1 at acpi0: C3, C2
> acpitz0 at acpi0: critical temperature 127 degC
> acpitz1 at acpi0: critical temperature 100 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 not present
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock at acpi0 not configured
> acpivideo at acpi0 not configured
> acpivideo at acpi0 not configured
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130c2806000c28
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 2000 MHz (1340 mV): speeds: 2000, 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int
> 16 (irq 11)
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Mobility FireGL V5250" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> agp0 at vga1: no integrated graphics
> drm at vga1 unsupported
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
> apic 1 int 17 (irq 11)
> azalia0: codec[s]: Analog Devices/0x1981, Conexant/0x2bfa, using Analog
> Devices/0x1981
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int
> 20 (irq 11)
> pci2 at ppb1 bus 2
> em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic
> 1 int 16 (irq 11), address 00:1a:6b:6b:20:6c
> ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int
> 21 (irq 11)
> pci3 at ppb2 bus 3
> wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> apic 1 int 17 (irq 11), MoW1, address 00:1b:77:8d:23:55
> ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int
> 22 (irq 11)
> pci4 at ppb3 bus 4
> ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int
> 23 (irq 11)
> pci5 at ppb4 bus 12
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int
> 16 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int
> 17 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int
> 18 (irq 11)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int
> 19 (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int
> 19 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci6 at ppb5 bus 21
> cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int
> 16 (irq 11)
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4083N, 1.00> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 1
> int 16 (irq 11), AHCI 1.1
> scsibus1 at ahci0: 32 targets, initiator 32
> sd0 at scsibus1 targ 0 lun 0: <ATA, ST910021AS, 4.06> SCSI3 0/direct fixed
> sd0: 95396MB, 12161 cyl, 255 head, 63 sec, 512 bytes/sec, 195371568 sec
> total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1
> int 23 (irq 11)
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> mtrr: Pentium Pro MTRR support
> ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev
> 1.00/0.01 addr 2
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
