Didier Wiroth wrote:
Hello,
I would like to buy/build a low power 19" rack-mount server for home
usage that will run openbsd.
The server should be used for (secure hardware) file storage (some
kind of hardware raid would be nice), nfs server, dhcp & dns caching
I was wondering if some of you are using this type of low power
hardware at home?
Can you recommend such a rack-mount device?
Can you recommend a european online reseller?
Thank you very very much for your advices!
Kind regards,
Didier
How about these ones:
http://linitx.com/viewcategory.php?catid=123&pp=116,123
I haven't used any of those though.
I bought this one for home use, and I'm very happy with it:
http://linitx.com/viewproduct.php?prodid=12137
You can find more information on the vendor's home page:
http://www.lex.com.tw/
And here's the obligatory dmesg & sysctl porn (yes, I know, it needs a
more current snapshot...)
HTH,
Stijn
OpenBSD 4.6-current (GENERIC) #123: Sat Aug 22 14:20:26 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR
real mem = 1005023232 (958MB)
avail mem = 964964352 (920MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/22/08, BIOS32 rev. 0 @ 0xf9f00,
SMBIOS rev. 2.3 @ 0xf0000 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 08/22/2008
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd654
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd550/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1001 MHz: speeds: 1333, 1067 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
10, address 00:30:18:4c:18:c9
em1 at pci0 dev 6 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
11, address 00:30:18:4c:18:ca
em2 at pci0 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
5, address 00:30:18:4c:18:cb
ral0 at pci0 dev 9 function 0 "Ralink RT2561" rev 0x00: irq 11, address
00:08:a1:9c:33:68
ral0: MAC/BBP RT2661B, RF RT2527
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
wd0 at pciide1 channel 1 drive 0: <SAMSUNG CF/ATA>
wd0: 1-sector PIO, LBA, 497MB, 1018080 sectors
wd0(pciide1:1:0): using PIO mode 4
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ff65 netmask ff65 ttymask ffff
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
$ sysctl hw
hw.machine=i386
hw.model=VIA C7 Processor 1000MHz ("CentaurHauls" 686-class)
hw.ncpu=1
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0
hw.diskcount=1
hw.sensors.viasio0.temp0=6.84 degC
hw.sensors.viasio0.temp1=52.57 degC (UCH5)
hw.sensors.viasio0.volt0=3.61 VDC (UCH1)
hw.sensors.viasio0.volt1=2.51 VDC (UCH2)
hw.sensors.viasio0.volt2=3.38 VDC (UCH3)
hw.sensors.viasio0.volt3=2.43 VDC (UCH4)
hw.sensors.viasio0.volt4=3.38 VDC (+3.3V)
hw.cpuspeed=1333
hw.setperf=100
hw.product=CN700-8237
hw.uuid=Not Set
hw.physmem=1005023232
hw.usermem=1005010944
hw.ncpufound=1
