On Fri, Jul 23, 2010 at 7:16 AM, patrick keshishian <pkesh...@gmail.com> wrote: > Seems at least the last two macppc snapshots I've tried had a broken > X. I saw mention of this from another user on po...@[1]. > > Just curious if this is being worked on, is there anything I can do to help?
This is new to me. - when was your previous update ? The only recent change that can affect X is the switch to gcc4. Did you follow the instructions in current.html ? - can you rebuild X manually and get a backtrace ? (instructions are in /usr/xenocara/README) > > [1] http://marc.info/?l=openbsd-ports&m=127983358723897&w=2 > > [2] dmesg copy-and-pasted from notepad.exe (sorry for any mangling) > > [ using 454492 bytes of bsd ELF symbol table ] > console out [ATY,Via_A]console in [keyboard] USB and ADB found, using ADB > using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr > 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: > width 1024 linebytes 1024 height 768 depth 8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.7-current (GENERIC) #68: Thu Jul 22 00:18:09 MDT 2010 > dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC > real mem = 671088640 (640MB) > avail mem = 637054976 (607MB) > mainbus0 at root: model PowerBook6,3 > cpu0 at mainbus0: 7455 (Revision 0x303): 799 MHz: 256KB L2 cache > mem0 at mainbus0 > spdmem0 at mem0: no EEPROM found > spdmem1 at mem0: 512MB DDR SDRAM non-parity PC2100CL2.5 > memc0 at mainbus0: uni-n > "hw-clock" at memc0 not configured > kiic0 at memc0 offset 0xf8001000 > iic0 at kiic0 > adt0 at iic0 addr 0xae: adt7467 rev 0x71 > "cy28512" at iic0 addr 0xe9 not configured > mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff > pci0 at mpcpcibr0 bus 0 > pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 > vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01, mmio > wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) > mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5 > pci1 at mpcpcibr1 bus 0 > pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 > bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, > address 00:0d:93:84:04:88 > macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 > openpic0 at macobio0 offset 0x40000: version 0x4614 little endian > macgpio0 at macobio0 offset 0x50 > macgpio1 at macgpio0 offset 0x9 irq 47 > pgs0 at macgpio0 offset 0x11: irq 55 > "gpio4" at macgpio0 offset 0x1e not configured > "frequency-gpio" at macgpio0 offset 0x1a not configured > "voltage-gpio" at macgpio0 offset 0x1b not configured > "slewing-done" at macgpio0 offset 0x12 not configured > "gpio5" at macgpio0 offset 0x6f not configured > "gpio6" at macgpio0 offset 0x70 not configured > "gpio11" at macgpio0 offset 0x75 not configured > "extint-gpio15" at macgpio0 offset 0x67 not configured > "escc-legacy" at macobio0 offset 0x12000 not configured > zsc0 at macobio0 offset 0x13000: irq 22,23 > zstty0 at zsc0 channel 0 > zstty1 at zsc0 channel 1 > snapper0 at macobio0 offset 0x10000: irq 30,1,2 > "timer" at macobio0 offset 0x15000 not configured > adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets > akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T) > wskbd0 at akbd0: console keyboard, using wsdisplay0 > ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi > wsmouse0 at ams0 mux 0 > abtn0 at adb0 addr 7: brightness/volume/eject buttons > apm0 at adb0: battery flags 0x5, 100% charged > piic0 at adb0 > iic1 at piic0 > "battery" at macobio0 offset 0x0 not configured > "backlight" at macobio0 offset 0xf300 not configured > kiic1 at macobio0 offset 0x18000 > iic2 at kiic1 > wdc0 at macobio0 offset 0x20000 irq 24: DMA > atapiscsi0 at wdc0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <QSI, CD-ROM TCR-241, WL15> ATAPI > 5/cdrom removable > cd0(wdc0:0:0): using BIOS timings, DMA mode 2 > audio0 at snapper0 > ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0, > version 1.0, legacy support > ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0, > version 1.0, legacy support > ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, > version 1.0, legacy support > ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 > ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 > ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci3: USB revision 1.0 > uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci4: USB revision 1.0 > uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6 > pci2 at mpcpcibr2 bus 0 > pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 > kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 > wdc1 at kauaiata0 irq 39: DMA > wd0 at wdc1 channel 0 drive 0: <SAMSUNG HM100JC> > wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors > wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 > "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured > gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, > address 00:0a:95:b5:3a:e2 > bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 > uhub6 at uhub5 port 1 "ALCOR Generic USB Hub" rev 1.10/3.14 addr 2 > uhidev0 at uhub6 port 1 configuration 1 interface 0 "Microsoft > Corporation Microsoft \M-. Laser Mouse 6000" rev 2.00/1.01 addr 3 > uhidev0: iclass 3/1 > ums0 at uhidev0: 5 buttons, Z dir > wsmouse1 at ums0 mux 0 > uhidev1 at uhub6 port 2 configuration 1 interface 0 "Rextron, Inc. USB > K/M for SUN" rev 1.10/1.01 addr 4 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 33 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev2 at uhub6 port 2 configuration 1 interface 1 "Rextron, Inc. USB > K/M for SUN" rev 1.10/1.01 addr 4 > uhidev2: iclass 3/1 > ums1 at uhidev2: 3 buttons, Z dir > wsmouse2 at ums1 mux 0 > softraid0 at root > bootpath: /p...@f4000000/at...@d/d...@0:/bsd > root on wd0a swap on wd0b dump on wd0b > umass0 at uhub0 port 1 configuration 1 interface 0 "CBM Flash Disk" > rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <CBM, Flash Disk, 5.00> SCSI2 0/direct removable > sd0: 2012MB, 512 bytes/sec, 4121600 sec total > sd0 detached > scsibus1 detached > umass0 detached > umass0 at uhub0 port 1 configuration 1 interface 0 "CBM Flash Disk" > rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <CBM, Flash Disk, 5.00> SCSI2 0/direct removable > sd0: 2012MB, 512 bytes/sec, 4121600 sec total > sd0 detached > scsibus1 detached > umass0 detached > umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston > DataTraveler 2.0" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 > 0/direct removable > sd0: 3819MB, 512 bytes/sec, 7823296 sec total > sd0 detached > scsibus1 detached > umass0 detached > umass0 at uhub0 port 1 configuration 1 interface 0 "USBest Technology > USB Mass Storage Device" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Flash, Drive UT_USB20, 0.00> SCSI2 > 0/direct removable > sd0: 120MB, 512 bytes/sec, 247296 sec total > > [3] Xorg.0.log produced by startx (also pasted from notepad.exe) > > > (--) Using wscons driver > > X.Org X Server 1.6.5 > Release Date: 2009-10-11 > X Protocol Version 11, Revision 0 > Build Operating System: OpenBSD 4.7 macppc > Current Operating System: OpenBSD pearl.boxsoft.com 4.7 GENERIC#68 macppc > Build Date: 20 July 2010 09:13:03AM > > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 22 22:06:11 2010 > (==) Using config file: "/etc/X11/xorg.conf" > (==) ServerLayout "X.org Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (==) Not automatically adding devices > (==) Not automatically enabling devices > (**) FontPath set to: > /usr/local/lib/X11/fonts/artwiz-aleczapka/, > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/, > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > (**) ModulePath set to "/usr/X11R6/lib/modules" > (II) Loader magic: 0x1ab0 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 5.0 > X.Org XInput driver : 4.0 > X.Org Server Extension : 2.0 > (II) Loader running on openbsd > (--) PCI:*(0:0:16:0) 1002:5c63:1002:5c63 ATI Radeon Mobility 9200 rev > 1, Mem @ 0x98000000/134217728, 0x90000000/65536, I/O @ 0x00000400/256, > BIOS @ 0x????????/131072 > (II) System resource ranges: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) "extmod" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dbe" will be loaded. This was enabled by default and also > specified in the config file. > (II) "glx" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dri" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dri2" will be loaded. This was enabled by default and also > specified in the config file. > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "dri" > (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dri2" > (II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so > (II) Module dri2: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.1.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > > Fatal server error: > Caught signal 11. Server aborting > > > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > Please also check the log file at "/var/log/Xorg.0.log" for additional > information. > > -- Matthieu Herrb
