I ran X on macppc compiled with gcc4. I'll try a snap later today.
On Fri, Jul 23, 2010 at 08:45:15AM +0200, Matthieu Herrb wrote:
> On Fri, Jul 23, 2010 at 7:16 AM, patrick keshishian <pkesh...@gmail.com>
> wrote:
> > Seems at least the last two macppc snapshots I've tried had a broken
> > X. I saw mention of this from another user on po...@[1].
> >
> > Just curious if this is being worked on, is there anything I can do to
> help?
>
> This is new to me.
>
> - when was your previous update ? The only recent change that can
> affect X is the switch to gcc4. Did you
> follow the instructions in current.html ?
> - can you rebuild X manually and get a backtrace ? (instructions are
> in /usr/xenocara/README)
>
> >
> > [1] http://marc.info/?l=openbsd-ports&m=127983358723897&w=2
> >
> > [2] dmesg copy-and-pasted from notepad.exe (sorry for any mangling)
> >
> > [ using 454492 bytes of bsd ELF symbol table ]
> > console out [ATY,Via_A]console in [keyboard] USB and ADB found, using ADB
> > using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr
> > 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000:
> > width 1024 linebytes 1024 height 768 depth 8
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> > The Regents of the University of California. All rights reserved.
> > Copyright (c) 1995-2010 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
> >
> > OpenBSD 4.7-current (GENERIC) #68: Thu Jul 22 00:18:09 MDT 2010
> > dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
> > real mem = 671088640 (640MB)
> > avail mem = 637054976 (607MB)
> > mainbus0 at root: model PowerBook6,3
> > cpu0 at mainbus0: 7455 (Revision 0x303): 799 MHz: 256KB L2 cache
> > mem0 at mainbus0
> > spdmem0 at mem0: no EEPROM found
> > spdmem1 at mem0: 512MB DDR SDRAM non-parity PC2100CL2.5
> > memc0 at mainbus0: uni-n
> > "hw-clock" at memc0 not configured
> > kiic0 at memc0 offset 0xf8001000
> > iic0 at kiic0
> > adt0 at iic0 addr 0xae: adt7467 rev 0x71
> > "cy28512" at iic0 addr 0xe9 not configured
> > mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
> > pci0 at mpcpcibr0 bus 0
> > pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
> > vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01, mmio
> > wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
> > mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5
> > pci1 at mpcpcibr1 bus 0
> > pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
> > bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52,
> > address 00:0d:93:84:04:88
> > macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
> > openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
> > macgpio0 at macobio0 offset 0x50
> > macgpio1 at macgpio0 offset 0x9 irq 47
> > pgs0 at macgpio0 offset 0x11: irq 55
> > "gpio4" at macgpio0 offset 0x1e not configured
> > "frequency-gpio" at macgpio0 offset 0x1a not configured
> > "voltage-gpio" at macgpio0 offset 0x1b not configured
> > "slewing-done" at macgpio0 offset 0x12 not configured
> > "gpio5" at macgpio0 offset 0x6f not configured
> > "gpio6" at macgpio0 offset 0x70 not configured
> > "gpio11" at macgpio0 offset 0x75 not configured
> > "extint-gpio15" at macgpio0 offset 0x67 not configured
> > "escc-legacy" at macobio0 offset 0x12000 not configured
> > zsc0 at macobio0 offset 0x13000: irq 22,23
> > zstty0 at zsc0 channel 0
> > zstty1 at zsc0 channel 1
> > snapper0 at macobio0 offset 0x10000: irq 30,1,2
> > "timer" at macobio0 offset 0x15000 not configured
> > adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
> > akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
> > wskbd0 at akbd0: console keyboard, using wsdisplay0
> > ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
> > wsmouse0 at ams0 mux 0
> > abtn0 at adb0 addr 7: brightness/volume/eject buttons
> > apm0 at adb0: battery flags 0x5, 100% charged
> > piic0 at adb0
> > iic1 at piic0
> > "battery" at macobio0 offset 0x0 not configured
> > "backlight" at macobio0 offset 0xf300 not configured
> > kiic1 at macobio0 offset 0x18000
> > iic2 at kiic1
> > wdc0 at macobio0 offset 0x20000 irq 24: DMA
> > atapiscsi0 at wdc0 channel 0 drive 0
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <QSI, CD-ROM TCR-241, WL15> ATAPI
> > 5/cdrom removable
> > cd0(wdc0:0:0): using BIOS timings, DMA mode 2
> > audio0 at snapper0
> > ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0,
> > version 1.0, legacy support
> > ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0,
> > version 1.0, legacy support
> > ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29,
> > version 1.0, legacy support
> > ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
> > ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
> > ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
> > usb1 at ohci0: USB revision 1.0
> > uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at ohci1: USB revision 1.0
> > uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at ohci2: USB revision 1.0
> > uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at ohci3: USB revision 1.0
> > uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at ohci4: USB revision 1.0
> > uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1
> > mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6
> > pci2 at mpcpcibr2 bus 0
> > pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
> > kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
> > wdc1 at kauaiata0 irq 39: DMA
> > wd0 at wdc1 channel 0 drive 0: <SAMSUNG HM100JC>
> > wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
> > wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> > "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
> > gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41,
> > address 00:0a:95:b5:3a:e2
> > bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
> > uhub6 at uhub5 port 1 "ALCOR Generic USB Hub" rev 1.10/3.14 addr 2
> > uhidev0 at uhub6 port 1 configuration 1 interface 0 "Microsoft
> > Corporation Microsoft \M-. Laser Mouse 6000" rev 2.00/1.01 addr 3
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 5 buttons, Z dir
> > wsmouse1 at ums0 mux 0
> > uhidev1 at uhub6 port 2 configuration 1 interface 0 "Rextron, Inc. USB
> > K/M for SUN" rev 1.10/1.01 addr 4
> > uhidev1: iclass 3/1
> > ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 33
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev2 at uhub6 port 2 configuration 1 interface 1 "Rextron, Inc. USB
> > K/M for SUN" rev 1.10/1.01 addr 4
> > uhidev2: iclass 3/1
> > ums1 at uhidev2: 3 buttons, Z dir
> > wsmouse2 at ums1 mux 0
> > softraid0 at root
> > bootpath: /p...@f4000000/at...@d/d...@0:/bsd
> > root on wd0a swap on wd0b dump on wd0b
> > umass0 at uhub0 port 1 configuration 1 interface 0 "CBM Flash Disk"
> > rev 2.00/1.00 addr 2
> > umass0: using SCSI over Bulk-Only
> > scsibus1 at umass0: 2 targets, initiator 0
> > sd0 at scsibus1 targ 1 lun 0: <CBM, Flash Disk, 5.00> SCSI2 0/direct
> removable
> > sd0: 2012MB, 512 bytes/sec, 4121600 sec total
> > sd0 detached
> > scsibus1 detached
> > umass0 detached
> > umass0 at uhub0 port 1 configuration 1 interface 0 "CBM Flash Disk"
> > rev 2.00/1.00 addr 2
> > umass0: using SCSI over Bulk-Only
> > scsibus1 at umass0: 2 targets, initiator 0
> > sd0 at scsibus1 targ 1 lun 0: <CBM, Flash Disk, 5.00> SCSI2 0/direct
> removable
> > sd0: 2012MB, 512 bytes/sec, 4121600 sec total
> > sd0 detached
> > scsibus1 detached
> > umass0 detached
> > umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston
> > DataTraveler 2.0" rev 2.00/1.00 addr 2
> > umass0: using SCSI over Bulk-Only
> > scsibus1 at umass0: 2 targets, initiator 0
> > sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
> > 0/direct removable
> > sd0: 3819MB, 512 bytes/sec, 7823296 sec total
> > sd0 detached
> > scsibus1 detached
> > umass0 detached
> > umass0 at uhub0 port 1 configuration 1 interface 0 "USBest Technology
> > USB Mass Storage Device" rev 2.00/1.00 addr 2
> > umass0: using SCSI over Bulk-Only
> > scsibus1 at umass0: 2 targets, initiator 0
> > sd0 at scsibus1 targ 1 lun 0: <Flash, Drive UT_USB20, 0.00> SCSI2
> > 0/direct removable
> > sd0: 120MB, 512 bytes/sec, 247296 sec total
> >
> > [3] Xorg.0.log produced by startx (also pasted from notepad.exe)
> >
> >
> > (--) Using wscons driver
> >
> > X.Org X Server 1.6.5
> > Release Date: 2009-10-11
> > X Protocol Version 11, Revision 0
> > Build Operating System: OpenBSD 4.7 macppc
> > Current Operating System: OpenBSD pearl.boxsoft.com 4.7 GENERIC#68 macppc
> > Build Date: 20 July 2010 09:13:03AM
> >
> > Before reporting problems, check http://wiki.x.org
> > to make sure that you have the latest version.
> > Markers: (--) probed, (**) from config file, (==) default setting,
> > (++) from command line, (!!) notice, (II) informational,
> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 22 22:06:11 2010
> > (==) Using config file: "/etc/X11/xorg.conf"
> > (==) ServerLayout "X.org Configured"
> > (**) |-->Screen "Screen0" (0)
> > (**) | |-->Monitor "Monitor0"
> > (**) | |-->Device "Card0"
> > (**) |-->Input Device "Mouse0"
> > (**) |-->Input Device "Keyboard0"
> > (==) Not automatically adding devices
> > (==) Not automatically enabling devices
> > (**) FontPath set to:
> > /usr/local/lib/X11/fonts/artwiz-aleczapka/,
> > /usr/X11R6/lib/X11/fonts/misc/,
> > /usr/X11R6/lib/X11/fonts/TTF/,
> > /usr/X11R6/lib/X11/fonts/OTF,
> > /usr/X11R6/lib/X11/fonts/Type1/,
> > /usr/X11R6/lib/X11/fonts/100dpi/,
> > /usr/X11R6/lib/X11/fonts/75dpi/,
> > /usr/X11R6/lib/X11/fonts/misc/,
> > /usr/X11R6/lib/X11/fonts/TTF/,
> > /usr/X11R6/lib/X11/fonts/OTF,
> > /usr/X11R6/lib/X11/fonts/Type1/,
> > /usr/X11R6/lib/X11/fonts/100dpi/,
> > /usr/X11R6/lib/X11/fonts/75dpi/
> > (**) ModulePath set to "/usr/X11R6/lib/modules"
> > (II) Loader magic: 0x1ab0
> > (II) Module ABI versions:
> > X.Org ANSI C Emulation: 0.4
> > X.Org Video Driver: 5.0
> > X.Org XInput driver : 4.0
> > X.Org Server Extension : 2.0
> > (II) Loader running on openbsd
> > (--) PCI:*(0:0:16:0) 1002:5c63:1002:5c63 ATI Radeon Mobility 9200 rev
> > 1, Mem @ 0x98000000/134217728, 0x90000000/65536, I/O @ 0x00000400/256,
> > BIOS @ 0x????????/131072
> > (II) System resource ranges:
> > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > (II) "extmod" will be loaded. This was enabled by default and also
> > specified in the config file.
> > (II) "dbe" will be loaded. This was enabled by default and also
> > specified in the config file.
> > (II) "glx" will be loaded. This was enabled by default and also
> > specified in the config file.
> > (II) "dri" will be loaded. This was enabled by default and also
> > specified in the config file.
> > (II) "dri2" will be loaded. This was enabled by default and also
> > specified in the config file.
> > (II) LoadModule: "dbe"
> > (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
> > (II) Module dbe: vendor="X.Org Foundation"
> > compiled for 1.6.5, module version = 1.0.0
> > Module class: X.Org Server Extension
> > ABI class: X.Org Server Extension, version 2.0
> > (II) Loading extension DOUBLE-BUFFER
> > (II) LoadModule: "dri"
> > (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
> > (II) Module dri: vendor="X.Org Foundation"
> > compiled for 1.6.5, module version = 1.0.0
> > ABI class: X.Org Server Extension, version 2.0
> > (II) Loading extension XFree86-DRI
> > (II) LoadModule: "dri2"
> > (II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
> > (II) Module dri2: vendor="X.Org Foundation"
> > compiled for 1.6.5, module version = 1.1.0
> > ABI class: X.Org Server Extension, version 2.0
> > (II) Loading extension DRI2
> > (II) LoadModule: "extmod"
> > (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
> > (II) Module extmod: vendor="X.Org Foundation"
> > compiled for 1.6.5, module version = 1.0.0
> > Module class: X.Org Server Extension
> > ABI class: X.Org Server Extension, version 2.0
> > (II) Loading extension MIT-SCREEN-SAVER
> > (II) Loading extension XFree86-VidModeExtension
> > (II) Loading extension XFree86-DGA
> > (II) Loading extension DPMS
> > (II) Loading extension XVideo
> > (II) Loading extension XVideo-MotionCompensation
> > (II) Loading extension X-Resource
> > (II) LoadModule: "glx"
> > (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
> > (II) Module glx: vendor="X.Org Foundation"
> > compiled for 1.6.5, module version = 1.0.0
> > ABI class: X.Org Server Extension, version 2.0
> >
> > Fatal server error:
> > Caught signal 11. Server aborting
> >
> >
> > Please consult the The X.Org Foundation support
> > at http://wiki.x.org
> > for help.
> > Please also check the log file at "/var/log/Xorg.0.log" for additional
> > information.
> >
> >
>
>
>
> --
> Matthieu Herrb