I should be able to answer this soon. I'll be swapping the flying saucers for 
the old style mounts on my "new" '92 GLi soon. I am soooo happy to have a 
running 16v, with a stick, again!

Someone mentioned the poly inserts for the old mounts provided very little 
isolation. Has anyone tried this: 

http://www.mr2sc.com/websites/tech/SolidMounts1.htm

with 60 durometer urethane?

I bet I will want a bit more stiffness. Maybe I will get the hop kit and look 
for a stiffer damper.

JV


> 
> From: [email protected]
> Date: 2004/10/27 Wed PM 03:30:38 PDT
> To: [email protected]
> Subject: Re: [a2-16v-list] bad engine mount?
> 
> In regards to replacing the front motor mount...
> 
> Must the bracket be taken off the motor? If the top nut is removed on the 
> front engine mount, and the engine is supported by a jack slightly raised so 
> that it is off the front motor mount stud, will the motor mount come off the 
> chassis by removal of the bolt from under the frame? Can it then be slide out 
> of position, replaced and the engine set back down?
> 
> -Greg
> 
> -------------- Original message -------------- 
> 
> > If you rock the car with it in gear you can see the engine move. Letting 
> > out 
> > the clutch with the hood up, you can also see the engine move. 
> > It is something you can do. The hardest part is usually lining up the bolt 
> > holes on the bracket and the starter motor. 
> > The mounts are not cheap. 
> > John 
> > ----- Original Message ----- 
> > From: "Greg Bensinger" 
> > To: 
> > Sent: Monday, October 25, 2004 10:24 PM 
> > Subject: [a2-16v-list] bad engine mount? 
> > 
> > 
> > Hey all, 
> > 
> > 91 Jetta GLI 
> > 
> > Mechanic says I have a bad front engine mount? How best to know? 
> > 
> > Is this something to tackle in the home garage? What is the precedure? 
> > 
> > Do most people just replace with stock? Or something aftermarket? I will 
> > likely only be replacing the front. 
> > 
> > Thanks, 
> > Greg 
> > _______________________________________________ 
> > a2-16v-list mailing list 
> > [email protected] 
> > http://mail.a2-16v.com/mailman/listinfo/a2-16v-list 
> > For list archives, see listinfo link above. 
> > 
> _______________________________________________
> a2-16v-list mailing list
> [email protected]
> http://mail.a2-16v.com/mailman/listinfo/a2-16v-list
> For list archives, see listinfo link above.
> 

Reply via email to