David, David et al I use old motor car inner tube; 18 cm by 10 cm, with a 3 cm by 3 cm triangle cut off at one corner, held on by a cable tie around the bottom end of the hub assembly.
Prior to cable ties, I used hose clips. Brian of SpotMog On Thu, Jun 21, 2012 at 12:25 PM, david taylor < [email protected]> wrote: > Thanks Brian, > > Just looking for the easiest approach. Various options on gaiters > including one with poppers for inspection purposes. Williams's @ Chippy > Sodbury may have a source. Still pondering marine grease too! > Cheers, David > > > On Tue, Jun 19, 2012 at 4:50 PM, Brian Cowell <[email protected]>wrote: > >> David >> >> It's a good idea to put gaiters over the rebound springs. >> >> Brian of SpotMog >> >> On Mon, Jun 18, 2012 at 4:45 PM, David Ashworth < >> [email protected]> wrote: >> >>> Interesting. I do use it - only because I ran out of LM and have plenty >>> of marine wheel bearing grease to hand. >>> >> > David, AA57MOG > ------------------------------------------- View posts on The Mail Archive http://www.mail-archive.com/[email protected]/ [http://www.mail-archive.com/[email protected]/] Modify Your Subscription: https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8 Powered by Listbox: http://www.listbox.com
