Dan,
I was thinking about doing that, I am glad to hear it worked for you. Did
you ever try to get a metal rod down the hole that the centerboard pennant
comes up through and giving it a whack?
Irv

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Dan
White
Sent: Monday, September 09, 2002 8:42 PM
To: [EMAIL PROTECTED]
Subject: Re: M_Boats: colapsing trunk?


Irv,

Try this.  Leave about 2 inches of slack in the pendant and then secure it
to the winch and cleat it off.  Then stand in
the companionway and jump up and down on the bilge just forward of the
trunk.  If the slack comes out of the pendant,
repeat the process.  Once the board is all the way down, raise it and start
all over again.  If after two or three
"lowerings" of the board, it doesn't work freely, then dive on it with a
putty knife and scrape the board as best you
can.

It worked for me.  My board was fouled with leaves and dirt and it just
needed to be lowered and raised a couple of
times to get all the gunk out.

Dan

Irv Kooris wrote:

> I think the idea is replacing the old boards with a glass leaded one that
> would fit the older boats. The question I have is how to free my board on
> Eugene's old boat. He showed me pictures of the board being down and out
> before he cleaned it. He told me it was taken down and epoxied. I have
been
> unable to free the board since purchasing her. Any ideas? She is in the
> water. Even with the board up she sails real well.
> Irv
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of dik
> lang
> Sent: Monday, September 09, 2002 4:02 PM
> To: [EMAIL PROTECTED]
> Subject: M_Boats: colapsing trunk?
>
> I have heard a lot of talk about sticking centerboards and always thought
it
> just due to marine growth and or rust on the board. How can the trunk
> colapse? How many boats actually suffer from this? It would seem the
easiest
> way to remedy the rust issue would be to drop the board, grind it smooth
and
> coat with epoxy. Why bother with replacing with a glassed lead one (though
> it does sound totally cool!).
>
> _________________________________________________________________
> Join the world�s largest e-mail service with MSN Hotmail.
> http://www.hotmail.com
>
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to