Steve,
I am trying to find solid teak. Thanks for the info.
Jesse
----- Original Message -----
From: "Steve R." <[EMAIL PROTECTED]>
To: "For and about Montgomery Sailboats"
<[EMAIL PROTECTED]>
Sent: Tuesday, August 19, 2003 7:35 AM
Subject: Re: M_Boats: Teak hatchboards and toe rail
> Hi Jesse,
>
> I have no need to replace the toe rails but my hatch boards are in sad
shape. Mine are plain plywood which have faded and warped.
>
> The newer M-15s use a 1/2 inch hatch board. My older M-15 has a 3/8 inch
hatch board.
>
> Steve E. found a source of teak faced plywood in Maryland called Harbor
Sales. They have a two sided sliced teak 9.5 mm plywood that should work,
item 489MSTAA.5
>
> Link:
>
> http://www.harborsales.net/
>
> Look under Nautical & Marine for sliced teak.
>
> The problem is, they sell plywood in 4 foot x 8 foot sheets. A sheet
costs $168. They are located 500 miles from me.
>
> The overall size of the hatch is about 28 inches wide by 28 inches high.
They will cut the plywood into twelve pieces of approximately 12 inches high
by 32 inches wide. The cutting charge is $8. This would yield enough
material to make four sets of hatch boards, with the total dimension of each
set being about 32 inches wide by 36 inches high. The cost per set would be
$44.
>
> Would you or anyone else like to jointly purchase a sheet of plywood?
>
> Steve R.
> M-15 #119
> Lexington, KY
>
>
> --- message from "Jesse Tate" <[EMAIL PROTECTED]> attached:
----------------------------------------------------------------------------
----
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
