I think I'd be interested as well, except (to throw a wrench into the works)
that I need a slightly larger finished size of approximately 36" x 36".

I liked my Ash plywood hatchboards until they got black streaks in them
despite my best efforts to seal them.  I guess I'll consider them
"practice". ;-)

Tod



-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bill
Riker
Sent: Tuesday, August 19, 2003 7:54 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: M_Boats: Teak hatchboards and toe rail


Steve,

I'm interested.

Bill Riker
M-15 #184
Storm Petrel
[EMAIL PROTECTED]

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steve R.
Sent: August 19, 2003 8:36 AM
To: For and about Montgomery Sailboats
Subject: Re: M_Boats: Teak hatchboards and toe rail


Hi Jesse,

I have no need to replace the toe rails but my hatch boards are in sad
shape.  Mine are plain plywood which have faded and warped.

The newer M-15s use a 1/2 inch hatch board.  My older M-15 has a 3/8 inch
hatch board.

Steve E. found a source of teak faced plywood in Maryland called Harbor
Sales.  They have a two sided sliced teak 9.5 mm plywood that should work,
item 489MSTAA.5

Link:

http://www.harborsales.net/

Look under Nautical & Marine for sliced teak.

The problem is, they sell plywood in 4 foot x 8 foot sheets.  A sheet costs
$168.  They are located 500 miles from me.

The overall size of the hatch is about 28 inches wide by 28 inches high.
They will cut the plywood into twelve pieces of approximately 12 inches high
by 32 inches wide.  The cutting charge is $8.  This would yield enough
material to make four sets of hatch boards, with the total dimension of each
set being about 32 inches wide by 36 inches high.  The cost per set would be
$44.

Would you or anyone else like to jointly purchase a sheet of plywood?

Steve R.
M-15 #119
Lexington, KY


--- message from "Jesse Tate" <[EMAIL PROTECTED]> attached:


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to