In a message dated 2/14/2005 8:35:58 PM Pacific Standard Time,
[EMAIL PROTECTED] writes:
I was planning on using quick release pins (thumb actuated with two ball
locks, one opposite of the other),
Me again...
Regarding the quick release. The only con I've heard is they must be
periodically washed and lubed as salt may crystalize on the inside and not
allow the
balls to come out.
Not sure if quick release is needed at the chain plates. Easier to wrap them
in rigging tape and tie the wires up to the mast with bungie cords. I believe
most leave the rigging attached to make it easier at launch and recovery.
Bill M17 Tipperary
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
