The tie wraps are a clever idea that I have read about in a number of
places.  I had used the foam pipe successfully in a previous boat and was
going with what I knew worked.  At any rate, I will have to work on it when
I take the mast down the next time.  It may require taking the chicken-head
fitting off the top; so it may be some time from now.

Steve

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Gary M Hyde
Sent: Thursday, April 13, 2006 6:59 PM
To: For and about Montgomery Sailboats
Subject: Re: M_Boats: Internal Mast Plug

You can also stop internal mast cables from rattling by attaching zip  
ties to the cables at 2-3-foot intervals and leaving the tails on the  
zip ties. Try to arrange them so the tails point in different  
directions.
--Gary Hyde
Pullman, WA
[EMAIL PROTECTED]
M17 #637 'Hydeaway 2'
"...There's nothing quite like messing about in boats..."


On Apr 13, 2006, at 6:01 PM, Larry E Yake wrote:

>
> On Wed, 12 Apr 2006 21:41:33 -0700 "Steve Shenkel" <[EMAIL PROTECTED]>
> writes:
>> I recently intended to put some foam pipe insulation over the
>> electrical
>> cables inside the mast to keep them from slapping the inside of the
>> mast
>> while at anchor.  About 4 feet into the bottom of the mast I ran
>> into
>> something hard.  An inspection with a flashlight revealed a bird's
>> nest.
>> However, after removing it a hard plug remained.
>>
>> Is this common (in Montgomery Mast's), or perhaps was this the PO's
>> attempt
>> at a similar fix?
>
> There was no plug inside Tullamore's mast.  I filled it with those
> Styrofoam packing peanuts to keep the wires from rattling, and then
> plugged the ends with pieces from a swim noodle. Perfect fit, and  
> extra
> floatation if the worst happens.
>
> Larry
>
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats



_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to