Bill Hart wrote:
Cause of what David? MPIR 1.3.0 works absolutely fine on t2 if you set
the library paths correctly.
I'm not convinced it should be necessary to set LD_LIBRARY_PATH like that. It is
not with other 64-bit applications. But I may be mistaken
BTW, a 64-bit build of mpir 1.3.0 on an HP-C3600, running HP-UX 11.11B, results
in the results shown below. This is with a PA-RISC processor - I do not have
access to any of the newer Itanium machines.
This is really good news, as an HP-UX port of Sage seems quite possible, and
would no doubt show up bugs not found on other platforms.
I have no intension personally of using Sage on HP-UX - why would I want to use
it on a power hungy 552 MHz single CPU device, when I have a quad core 3.33 GHz
Sun that uses a third of the power?
But from experience, compiling code on multiple platforms often shows up errors
not seen on other platforms, but lie in wait, ready to give the wrong answers at
some point in the future.
I'm really keen to improve the quality of Sage, and honestly believe that
building on other platforms will show up bugs. Real bugs have been discovered on
both Solaris and HP-UX which have not been seen in the more common platforms for
Sage.
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/mpz'
PASS: t-addsub
PASS: t-cmp
PASS: t-mul
PASS: t-mul_i
PASS: t-tdiv
PASS: t-tdiv_ui
PASS: t-fdiv
PASS: t-fdiv_ui
PASS: t-cdiv_ui
PASS: t-gcd
PASS: t-gcd_ui
PASS: t-lcm
PASS: dive
PASS: dive_ui
PASS: t-sqrtrem
PASS: convert
PASS: io
PASS: t-inp_str
PASS: logic
PASS: bit
PASS: t-powm
PASS: t-powm_ui
PASS: t-pow
PASS: t-div_2exp
PASS: reuse
PASS: t-root
PASS: t-perfsqr
PASS: t-jac
PASS: t-bin
PASS: t-get_d
PASS: t-get_d_2exp
PASS: t-get_si
PASS: t-set_d
PASS: t-set_si
PASS: t-fac_ui
PASS: t-fib_ui
PASS: t-likely_prime_p
PASS: t-lucnum_ui
PASS: t-scan
PASS: t-fits
PASS: t-divis
PASS: t-divis_2exp
PASS: t-cong
PASS: t-cong_2exp
PASS: t-sizeinbase
PASS: t-set_str
PASS: t-aorsmul
PASS: t-cmp_d
PASS: t-cmp_si
PASS: t-hamdist
PASS: t-oddeven
PASS: t-popcount
PASS: t-set_f
PASS: t-io_raw
PASS: t-import
PASS: t-export
PASS: t-pprime_p
PASS: t-perfpow
PASS: t-trial_division
PASS: st_hamdist
PASS: st_popcount
===================
All 61 tests passed
===================
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/mpz'
make[3]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/mpz'
Making check in mpq
make[3]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/mpq'
make t-aors t-cmp t-cmp_ui t-cmp_si t-equal t-get_d t-get_str t-inp_str
t-md_2exp t-set_f t-set_str
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/mpq'
make[4]: `t-aors' is up to date.
make[4]: `t-cmp' is up to date.
make[4]: `t-cmp_ui' is up to date.
make[4]: `t-cmp_si' is up to date.
make[4]: `t-equal' is up to date.
make[4]: `t-get_d' is up to date.
make[4]: `t-get_str' is up to date.
make[4]: `t-inp_str' is up to date.
make[4]: `t-md_2exp' is up to date.
make[4]: `t-set_f' is up to date.
make[4]: `t-set_str' is up to date.
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/mpq'
make check-TESTS
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/mpq'
PASS: t-aors
PASS: t-cmp
PASS: t-cmp_ui
PASS: t-cmp_si
PASS: t-equal
PASS: t-get_d
PASS: t-get_str
PASS: t-inp_str
PASS: t-md_2exp
PASS: t-set_f
PASS: t-set_str
===================
All 11 tests passed
===================
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/mpq'
make[3]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/mpq'
Making check in mpf
make[3]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/mpf'
make t-add t-sub t-conv t-sqrt t-sqrt_ui t-muldiv t-dm2exp reuse t-cmp_d
t-cmp_si t-div t-fits t-get_d t-get_d_2exp t-get_si t-get_ui t-gsprec t-inp_str
t-int_p t-mul_ui t-set t-set_q t-set_si t-set_ui t-trunc t-ui_div t-eq
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/mpf'
make[4]: `t-add' is up to date.
make[4]: `t-sub' is up to date.
make[4]: `t-conv' is up to date.
make[4]: `t-sqrt' is up to date.
make[4]: `t-sqrt_ui' is up to date.
make[4]: `t-muldiv' is up to date.
make[4]: `t-dm2exp' is up to date.
make[4]: `reuse' is up to date.
make[4]: `t-cmp_d' is up to date.
make[4]: `t-cmp_si' is up to date.
make[4]: `t-div' is up to date.
make[4]: `t-fits' is up to date.
make[4]: `t-get_d' is up to date.
make[4]: `t-get_d_2exp' is up to date.
make[4]: `t-get_si' is up to date.
make[4]: `t-get_ui' is up to date.
make[4]: `t-gsprec' is up to date.
make[4]: `t-inp_str' is up to date.
make[4]: `t-int_p' is up to date.
make[4]: `t-mul_ui' is up to date.
make[4]: `t-set' is up to date.
make[4]: `t-set_q' is up to date.
make[4]: `t-set_si' is up to date.
make[4]: `t-set_ui' is up to date.
make[4]: `t-trunc' is up to date.
make[4]: `t-ui_div' is up to date.
make[4]: `t-eq' is up to date.
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/mpf'
make check-TESTS
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/mpf'
PASS: t-add
PASS: t-sub
PASS: t-conv
PASS: t-sqrt
PASS: t-sqrt_ui
PASS: t-muldiv
PASS: t-dm2exp
PASS: reuse
PASS: t-cmp_d
PASS: t-cmp_si
PASS: t-div
PASS: t-fits
PASS: t-get_d
PASS: t-get_d_2exp
PASS: t-get_si
PASS: t-get_ui
PASS: t-gsprec
PASS: t-inp_str
PASS: t-int_p
PASS: t-mul_ui
PASS: t-set
PASS: t-set_q
PASS: t-set_si
PASS: t-set_ui
PASS: t-trunc
PASS: t-ui_div
PASS: t-eq
===================
All 27 tests passed
===================
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/mpf'
make[3]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/mpf'
Making check in rand
make[3]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/rand'
make t-iset t-lc2exp t-mt t-rand t-urbui t-urmui t-urndmm
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/rand'
make[4]: `t-iset' is up to date.
make[4]: `t-lc2exp' is up to date.
make[4]: `t-mt' is up to date.
make[4]: `t-rand' is up to date.
make[4]: `t-urbui' is up to date.
make[4]: `t-urmui' is up to date.
make[4]: `t-urndmm' is up to date.
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/rand'
make check-TESTS
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/rand'
PASS: t-iset
PASS: t-lc2exp
PASS: t-mt
PASS: t-rand
PASS: t-urbui
PASS: t-urmui
PASS: t-urndmm
==================
All 7 tests passed
==================
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/rand'
make[3]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/rand'
Making check in misc
make[3]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/misc'
make t-printf t-scanf t-locale
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/misc'
make[4]: `t-printf' is up to date.
make[4]: `t-scanf' is up to date.
make[4]: `t-locale' is up to date.
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/misc'
make check-TESTS
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/misc'
PASS: t-printf
PASS: t-scanf
PASS: t-locale
==================
All 3 tests passed
==================
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/misc'
make[3]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/misc'
Making check in cxx
make[3]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/cxx'
make
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/cxx'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/home/drkirkby/mpir-1.3.0/tests/cxx'
make check-TESTS
make[4]: Entering directory `/home/drkirkby/mpir-1.3.0/tests/cxx'
==================
All 0 tests passed
==================
--
You received this message because you are subscribed to the Google Groups
"mpir-devel" group.
To post to this group, send email to mpir-de...@googlegroups.com.
To unsubscribe from this group, send email to
mpir-devel+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/mpir-devel?hl=en.
