On 24/06/2013 16:10, leif wrote: > leif wrote: >> Brian Gladman wrote: >>> On 24/06/2013 15:10, Bill Hart wrote: >>>> Hi, >>>> >>>> I recall we had a warning related to ___gmpn_preinv_mod_1 which got >>>> fixed before the mpir-2.6.0 release. But despite this sounding like a >>>> familiar problem, I haven't been able to find a post where it was dealt >>>> with in the past. >>>> >>>> Can you post a copy of your config.h to help us get to the bottom of >>>> it. >>>> >>>> Perhaps Brian has some idea what is going on here. However, I am not >>>> sure if we are supporting vs2008 any more. >>> >>> We do through the command line build that Jason provided but this is now >>> unsupported. >>> >>> I have sometimes seen this problem when a build uses old configuration >>> files so it might be worth checking that a full clean has been done >>> before the build is started. >> >> Shooting into the dark: Isn't probably just the MPN_PATH wrong >> (opposite order, such that it doesn't match the definitions in config.h, >> especially HAVE_NATIVE_mpn_preinv_mod_1, which is 1): >> >> > (set MPNPATH=x86w x86w\p6 x86w\p6\mmx x86w\p6\p3mmx) > > P.S.: ___gmpn_preinv_mod_1 is implemented in x86w/p6, but now x86w. > > > And/or: Maybe just a typo in MPNPATH (should be MPN_PATH on Windows as > well I guess).
It is MPNPATH in Jason's command line build files. -- You received this message because you are subscribed to the Google Groups "mpir-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to mpir-devel+unsubscr...@googlegroups.com. To post to this group, send email to mpir-devel@googlegroups.com. Visit this group at http://groups.google.com/group/mpir-devel. For more options, visit https://groups.google.com/groups/opt_out.