On Tue, Mar 04, 2014 at 11:11:58AM +0000, Sarfraz Nawaz wrote: > It is an evaluation board that is powered by a small Lithium polymer > battery with a 3V regulator. I have checked that pin number 4 of the > 14-pin JTAG connector is at 3V with the FET cable connected to the > board but I still get the same error. Any ideas where I should look > next please? Thanks.
Hi Sarfraz, Have you tried debugging with the board powered by the FET, rather than the battery? Cheers, Daniel -- Daniel Beer <dlb...@gmail.com> www.dlbeer.co.nz IRC: inittab (Freenode) PGP key: 2048D/160A553B ------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users