It seems there is some talk about the driver that comes with Erix...
As far as I know the driver should work with the ASCII RS232C interface
(only first channel),
it at least works with the SONY RS232C interface which is ASCII compatible.
I must say that I do not remember any previous complaints about the driver
not functioning with
the ASCII interface.
The Gradiente interface is another story, a long time ago I have heard about
this interface, but
I do not have the specs or the hardware. So it is hard to develop a driver
for it. If there is still a
need for such a driver, I could make it. At least, when I receive the specs
from someone...
Greetings from Erik Maas
----- Original Message -----
From: Adriano Camargo Rodrigues da Cunha <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, June 30, 2000 3:16 AM
Subject: Re: games
> Ah, yes, nice... But I think my RS-232 isnīt very good, it hangs my MSX
> when I try run the fossil-driver...
Erix Fossil driver doesn't work with Gradiente CT-80 NET RS232
Interface or with ASCII RS232 Interface.
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
