On 11/18/06, One Bad Daddy <[EMAIL PROTECTED]> wrote: > Anytime I select the Linux box from the MediaMVP Preferred Server screen or > bypass that step, I end up with "failed to locate GUI server"/"contacting
I'm pretty sure that message comes from the Hauppauge dongle.bin and not from the boot loader so when you get it you have to power off the mvp with the power not the remote to load the dongle from the selected tftp server. Avoid using back. >I also double checked and tested my tftp setup again, which seems to be >working as expected. I'm assuming you are connecting from another box to do this test. Can you confirm that it is working with the following commands tftp >connect yourip 16869 >get dongle.bin.ver >get dongle.bin If this doesn't work ensure you must manually ensure that you - are running tftp on port 16869 - included dongle.bin.ver in the tftp folder - renamed dongle.bin.mpvpmc to dongle.bin > If it is any help whatsoever, I can get the GB-PVR software to work > consistently with my MVP H3. Then as a minimum you should be able load mvpmc with gbpvr and telnet to it by replacing the dongle.bin in the gbpvr\Dongle folder assuming you are running version 98.08 or 98.13. Also make sure that the Hauppauge software is not running confirm with a net stop MVPMediaSvc Martin ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Mvpmc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mvpmc-users mvpmc wiki: http://mvpmc.wikispaces.com/
