On Thu, 29 May 2008, Neeesat wrote: > > My MVP is without flash and it's a model: D3A > > I have change dongle.bin to dongle.bin.mvpmc and downloaded the latest > original dongle.bin from hauppauge and place it in /tftpboot. I dont know if > this helps.
I'm sorry, please don't even look at the HOWTOs on the main mvpmc site, they are well over 3 years out of date. I tried to remove those a month or so ago, but failed. So there is no need whatsoever for you to download the original hauppauge firmware. I shouldn't think it'll do much harm where it is though. > My MVP stops at booting with one square and the rest flashing. Here is my > latest syslog: Is the screen you're describing with squares on the one that says Hauppauge on it? Or the one after that that says mvpmc? The logs below indicate that it's aparently suceeding in DHCPing and then seems to be successfully starting a TFTP transfer of the dongle. However if it's still stuck on the Hauppauge screen it sounds like either the TFTP is failing, or the dongle.bin you're transfering is maybe corrupted. Can you put more of the debugging options on for your atftpd? (man atftpd will tell you the flags you can specify, and you'll probably need to put them in /etc/inetd.conf and then "killall -HUP inetd"). How long have you had your MediaMVP? AFAIK the non-flash devices haven't been on sale new for quite a while (18 months in europe, longer in the US). Have you ever managed to boot anything else on it? Cheers, Simon ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Mvpmc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mvpmc-users mvpmc wiki: http://mvpmc.wikispaces.com/
