I just put Eco base on my natural nails and two coats of Shellac Hot
Chillis and Eco clear. I removed the dispersion layer and it still
felt kinda rubbery and a little tacky. I washed with soap and water
and that helped but not shiney enough and still a little rubbery. I
put on the Eco clear topcoat. Now I have the shine but not hard,
still rubbery feeling. Is this normal with Shellac and Eco? I have
only used Eco a few times and this is my first time with Shellac and
I haven't put any of it on myself. So either this is normal or it is
because I mixed these two products. My bulbs are new. I used the new CND lamp.
Angie Wingerter
Angie, Elaine might be able to give you a better answer, but off the
top of my head, I think it is the difference between the eco and the
Shellac. Remember Shellac is a gel/polish mix while eco So Quick is a
gel with pigments. The only other thing I would think that might
cause this is your bulbs, or the lamp you used might not be curing
the Shellac enough/properly or possibly over cured it. Oh sorry, I
see you said the bulbs are new and it was the new CND lamp, in that
case I am going to lean towards the mixing of these products because
they are different in their chemical makeup.
Have you used the eco So Quick complete system and had the rubbery
issue? If so which lamp?
Lorraine, webgirl
www.ManicuresThatLast.com
eco So Quick Soak Off
Turn your Part-Time Clients into Full-Time Bookings!
3 Minutes On, 5 Minutes Off - Guaranteed
--
You received this message because you are subscribed to the Google Groups
"NailTech" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/nailtech?hl=en.
