Hey David, that looks great. I'm cheering you on.. BTW, I have a pick and place machine and a reflow oven, so when you get to the point of doing small runs look me up.. Cheers ..c
On Friday, January 15, 2016 at 12:58:11 AM UTC-5, nixiebunny wrote: > > I have been doing a lot of component placement work on the new scope > clock board. Tetris! This is what it looks like. The six square controls > with equilateral triangle dots are the oscilloscope knobs, and the > function encoder is at bottom center. The other square pots are trimmers > accessible through the front panel. > > The HV power supply is at upper left, deflection at upper right, V power > lower left, computer at lower right. A big USB-B connector is behind the > lower right corner. RTC battery is at bottom. > > The thru-hole parts (other than controls) are rear mounted, with all SMT > parts on the front. There will be 5/16" standoffs in the six outer holes > to mount the board to the front panel. > > This is a work in progress. > > -- > David Forbes, Tucson AZ > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9203500a-22d5-42fd-8262-0eaedfe00519%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.