But, if you get the maths right you can actually mimic the response. [I have audio and broadcast radio station background btw] Been here before with this argument of course. So, it is possible to get the same indication but that leaves the semantics to deal with. And there are subtle aspects of the visual persistence of different displays to deal with too.
The argument usually revolves around the substitution of standard moving coil meters for the correct type. The original spec document is on the web. The attenuator that 'must' be used and the standard levels topic gets quite interesting. [Talking about the way the indicated value on the meter when used in its most sensitive setting got used as the way to refer to the actual level, rather than the fact that the actual level was higher - I didn't tell that story very well; have a look at the specs and the circuit and how the common useage developed.] John Kaesehagen Australia ----- Original Message ----- From: Instrument Resources of America To: neonixie-l@googlegroups.com Sent: Tuesday, January 24, 2017 6:52 AM Subject: Re: [neonixie-l] IN-13 Lifespan As far as I know, one can NOT build a bar-graph, or neon lamp style, LED, or any other indicator type, of VU meter. (Perhaps you built a 'level indicator' of sorts.) The very definition of a VU meter (at least the professional type) involves the mechanical ballistic damping, and mechanical response of the needle and the meter movement. Ira. On 1/23/2017 11:41 AM, TheJBW wrote: About 1.5years ago, I built this really nice stereo vu-meter using IN-13 bargraph tubes. About two weeks ago, one of the tubes made a "tink" sound and the current control went away -- the tube stayed ignited, but the "bar" was stuck at the bottom. I noticed that the spacer at the far end of the tube was also suddenly free. I figured this was an unlikely failure, so I replaced the tube the spare stock. Unfortunately, one week later, the tube on the other channel did the exact same thing! I've attached pictures of my drive and power circuitry -- the signal conditioning circuitry is omitted, but I think it unlikely to be relevant. I figure something must be wrong with my circuit that is causing early death, but I'm not sure as to what. Ideas anyone? -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/ffefa631-9ae9-4ee1-a55c-b648cf5c7012%40googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/c917d5ac-89ab-61f0-3a06-c1c85b523176%40HUGHES.NET. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/263868386B6648FA8C6CC02E310FD9FC%40compunet4f9da9. For more options, visit https://groups.google.com/d/optout.